Using SPX to Connect to a Windows Server
This section documents the use of SPX when connecting to a Pervasive PSQL server running on a Windows machine.
Configuring Pervasive PSQL to use SPX
SPX is not a native protocol on the Windows platforms. If you want to use SPX, perform the following procedures to ensure proper operation with Pervasive PSQL.
Changing Pervasive’s configuration to use SPX with a Windows platform
If you have both TCP/IP and SPX installed, you must remove TCP/IP from the Pervasive PSQL Client configuration to make SPX function with Pervasive applications
1
Access Control Center (PCC) from the operating system Start menu or Apps screen.
2
In the Pervasive PSQL Explorer, expand Local Client.
3
Right-click MicroKernel Router and select Properties. Login if prompted.
4
Click Communication protocols. In the window to the right, a list of Supported protocols displays.
5
Clear TCP/IP from the list of selected protocols and click OK.
Changing Windows Configuration to Make SPX Run with Pervasive PSQL
►
To Ensure that your SPX settings are correct
1
From the operating system, access the Network information.
2
Select the Properties for Local Area Connection.
3
Select the Properties of the SPX connection.
4
In the Frame Type field, ensure that the correct frame type for your network is selected. Do not use Auto Detect.
5
In the Network number field, enter a non-zero value for your network address. For information about what your network address should be, contact your system administrator.