Connectivity Guide > Connectivity Guide > Troubleshooting Connectivity > Where Ingres Net Information Is Stored > config.dat--Store Net Configuration Values
Was this helpful?
config.dat--Store Net Configuration Values
The following Ingres Net configuration parameters, stored in config.dat, can be viewed and changed using the Configuration Manager (vcbf) or Configuration-By-Forms (cbf) utility. The default values are assigned during installation.
Note:  The Net Server is the Communications Server.
Parameter
Default
vcbf page
cbf screen
inbound_limit
outbound_limit
64 inbound sessions
64 outbound sessions
Parameters Page, Net Server Component
Configure Net Server Definition screen
error_level
Level 4
Parameters Page, Net Server Component
Configure Net Server Definition screen
log_level
Level 4
Parameters Page, Net Server Component
Configure Net Server Definition screen
Protocol
Any protocol present at installation is indicated as active
Protocols Page, Net Server Component
Configure Net Server Protocols screen
Listen Address
A GCC listen address is assigned for any protocol present at installation. (The format depends on the protocol.)
Protocols Page, Net Server Component
Configure Net Server Protocols screen
default_server_
class
INGRES
Parameters Page, Name Server Component
Configure Name Server screen
remote_vnode
No default value
Parameters Page, Name Server Component
Configure Name Server screen
local_vnode
Name of host machine
Parameters Page, Name Server Component
Configure Name Server screen
Last modified date: 08/14/2024