System Administrator Guide > System Administrator Guide > Troubleshooting Actian X > Actian X Processes on Windows > Check for DBMS Server Process Errors on Windows
Was this helpful?
Check for DBMS Server Process Errors on Windows
The command to start the DBMS Server process (iidbms) from the Actian X login is ingstart -iidbms. If the DBMS Server did not start:
1. Verify that the recovery process II_IUSV_nnn is running, as described in Check for Recovery Process Errors on Windows.
2. Verify that the recovery process II_IUSV_nnn is not in a recovery state, as described in Recovery Process Monitoring. This is a likely situation if there was a sudden shutdown because of a power failure or some other system failure.
3. Try to start the DBMS Server. Issue the following command at the operating system prompt:
ingstart -iidbms
4. If you corrected a recovery process problem, verify that Actian X starts normally.
a. Shut down the partially started installation with the ingstop command.
b. Restart the installation with the ingstart command.
Last modified date: 08/14/2024