User Guide : Map Connectors : Source and Target Map Connectors : IBM DB2 Universal Database 9.5
Share this page             
IBM DB2 Universal Database 9.5
IBM DB2 Universal Database is a source or target connector that connects directly to IBM DB2 Universal Database, or connects with an ODBC 3.5 driver. Version 9.5 is supported.
See Also
Installing an ODBC Driver
ODBC Connectivity Tips
Connectivity Pointers
Make sure the IBM DB2 9.5 client driver is installed and configured properly on your workstation.
If possible, create query statements using the source database application, so that syntax and validity can be checked by the native application. You can then copy the query statement and paste it in the Query Statement box.
Connector-Specific Notes
This connector does not support Unicode. Use the ODBC 3.5 connector to enable Unicode support in an IBM DB2 Universal Database.
Property Options
You can set the following source (S) and target (T) properties in IBM DB2 Universal Database connections.
If set to True, it allows you to automatically commit changes as they are made by each SQL statement, instead of waiting until the end of the transaction.
Also, if this option is set to True, you cannot roll back changes after they are done. It will overwrite the CommitFrequency value, which means that the changes are committed by each SQL statement irrespective of the value set for CommitFrequency.
The default value is False.
Use bulk operations for faster insert. This property determines if an insert statement is executed for each record or a bulk add is executed for each record. The default is false, the slower setting. If you want to maximize speed and instruct the integration platform to use a bulk add, change this setting to true.
Allows you to control how often data is committed to the database when the AutoCommit property is set to False.
The default value is zero that is, the data is committed at the end of the transformation, allowing rollback on error. This is the slowest setting. When performing large transformations, this is not practical as it may produce too many transaction log entries.
Specifying a nonzero value indicates that data is committed to the database after inserting or updating specified number of records.
Specify additional SQL data definition language statements to be executed after their target table is created. This is similar to support provided for SQL pass-through in the SQL import connectors. Each line must be a valid ODBC DDL statement. This property has no default. For an example, see ConstraintDDL Example.
Type of cursor to use for retrieving records from the source table. Available options are Forward Only, Static and Dynamic. The default setting is Forward Only. For more details, see CursorType.
Allows you to control the driver prompt for information. The options available are Prompt, Complete (default), Complete Required, and No Prompt. The Prompt option asks the user all information. The Complete option asks the user for information they forgot to enter. The Complete Required option asks the user only for information required to complete the connection. The No Prompt option does not ask the user for any information.
Enter any valid ODBC connect string options here. There is no default.
Type of encoding to use with source and target files.
All databases have what are called quoted identifiers. You use quoted identifiers to make the SQL statement parseable and distinguish between columns and character data in SQL statements. For example, Oracle uses double quotes for column and table names in SQL statements and uses single quotes for character data. In a SQL statement, you should enclose identifiers containing special characters or match keywords in identifier quote characters; (also known as delimited identifiers in SQL-92).
For example, the Accounts Receivable identifier is quoted in the following SELECT statement:
SELECT * FROM "Accounts Receivable"
If you do not use identifier quotes, the parser assumes there are two tables, Accounts and Receivable and return a syntax error that they are not separated by a comma.
IdentifierQuotes has four options:
Specifies the maximum number of characters to write to a field. The maximum data length for long data types. Default is 1 MB. Reset this number based upon your available memory and target requirements.
When this connector requests the column field size for these data types, it checks for a returned value greater than the MaxDataLength value. If the value is greater, the MaxDataLength value is used.
Some ODBC drivers have maximum data length limitations. If you choose an ODBC source or target connector and the default setting is not 1 MB, the integration platform sets the value for that particular ODBC driver. Under those conditions, do not set the MaxDataLength property to a higher value.
Maximum Array Size
Maximum number of records fetched or inserted with each cursor operation. The default is 1.
Allows you to store the ODBC connection. Default is true. If you select false, you are prompted for connection information each time you run the transformation.
Specify a list of field names used to create a primary key. Field names are delimited by commas. If this property contains one or more field names, these names are included in the SQL CREATE statement when the connector is in replace mode. This property has no default.
To use this property, your ODBC driver must support integrity enhancement facility (IEF). Only the more advanced ODBC drivers support this.
If set to true, this property allows you to see all tables created by the DBA in the database. The system table names appear in the table list. Default is false.
Note:  This property is applicable only if the user is logged onto the database as the database administrator. Only the DBA has access to system tables.
Allows you to specify any one of five isolation levels when reading from or writing to a database table with ODBC. The default is Serializable.
The ANSI SQL 2 standard defines three specific ways in which serializability of a transaction may be violated: P1 (Dirty Read), P2 (Nonrepeatable Read), and P3 (Phantoms).
The four isolation levels are as follows:
READ_UNCOMMITTED – Permits P1, P2, and P3.
READ_COMMITTED – Permits P2 and P3. Does not permit P1.
REPEATABLE_READ – Permits P3. Does not permit P1 and P2.
SERIALIZABLE – Does not permit P1, P2 or P3.
For further details about TransactionIsolation levels, refer to IBM DB2 Universal Database ODBC documentation.
If set to True, this property allows you to see the view names in the table list along with the table names. Default is True.
Note:  This property supports only Append and DeleteAndAppend output modes and does not support the Replace output mode.
Provides a pass-through mechanism for SQL connectors where advanced users can construct the Where clause of the SQL query themselves. It can be used as an alternative to writing a lengthy query statement. You may use this to instruct the SQL database server to filter the data based on a particular condition before sending it to the integration platform. There is no default value for this property.
Note:  This property is not applicable when the source connection is a query statement or file. This property enables data filtering when you select a table.
The UseCursors property allows you to turn cursor support on or off. The default is false. If set to true and the specified ODBC driver does not support cursor inserts, the integration platform uses the SQL INSERT mode of adding records.
For exports, cursor support is supposed to enhance the performance of inserting records. This appears to be the case for desktop databases. For database servers, there is no noticeable change in insert speed. They seem to execute prepared queries about as quickly as they handle cursor inserts
Another complication of cursor inserts is that some drivers require that the target table be indexed, otherwise positioned updates (cursors) are not allowed. Two additional properties in the ODBC export connector address this issue: PrimaryKey and ConstraintDDL.
Determines the number of rows to be sent to the server at one time. The default value is 1000, meaning each row is individually sent to the server. Larger values will buffer multiple rows and send them all at once. While this improves the speed, it affects error reporting (a server error won't be detected/reported until the next batch of records is sent to the server).
The maximum value allowed for this property is 100000. While the connector allows the value to be set that high, many drivers have lower limits. The connector will log a message indicating if the driver is forcing a lower value for the array size. In addition, the connector does not support arrays when there is a LOB-type field in the table, or when the (maximum) length of a character-type field is longer than 32767 characters. In these cases, a message will be logged indicating the array size has been reduced to 1.
Due to the way the connector attempts to support older drivers, the array support requires BulkOperations and UseCursors is set to True or both must be set to False. If BulkOperations is False and UseCursors is True, then the array size is ignored and a message is logged indicating this condition.
The CursorType option specifies the type of cursor to use for retrieving records from the source table. The choices available are Forward Only, Static and Dynamic. The default setting is Forward Only. For more information, see Cursors.
ConstraintDDL Example
In these example statements, we create two indices on the table called "mytable". The first index does not allow duplicates and the index values are stored in ascending order. The second index is a compound index on fields Field2 and Field3.
CREATE UNIQUE INDEX index1 ON mytable (Field1 ASC)
CREATE INDEX index2 ON mytable (Field2, Field3)
ConstraintDDL is executed only if replace mode is used for the target. If there are errors, the errors are written to the error and event log file. An error during transformation brings up the transformation error dialog box. To ignore DDL errors, you may continue the transformation.
ConstraintDDL also supports an escaping mechanism to specify DDL in the native SQL of the DBMS. Any statement preceded by an "@" is sent to the DBMS.
The following is a DDL statement for creating a primary key for the table mytable.
@CREATE INDEX pk_mytable ON mytable (Field1, Field2) WITH PRIMARY
Some ODBC drivers do not support the SQL extensions needed to create a primary key with the ODBC variant of the SQL CREATE statement. To create a primary key in these cases, use native SQL.
Data Types
The following data types are supported:
char () for bit data
long raw
long varchar
varchar () for bit data
The length of fields stored in your data file.