6. Troubleshooting Ingres : Ingres Processes on VMS : Data Access Server Errors on VMS : Check for Data Access Server Errors on VMS
 
Share this page                  
Check for Data Access Server Errors on VMS
Use the following procedure if the Data Access Server process did not start:
1. Verify that you have installed the Ingres Net component.
2. Verify that you have installed the correct protocol drivers and they are functioning properly.
3. Verify the Data Access Server has been properly configured through the Configuration-By-Forms (cbf) utility.
4. If you are still having problems, set the following trace to capture additional diagnostic data before calling technical support:
define II_GCD_TRACE 4
define II_GCD_LOG filename
ingstart -iigcd