Phase 2: Convert the Applications
Note: Do not proceed with the conversion until you have corrected or documented any issues with the existing applications. Actian Corporation cannot support problems with your conversion unless you can demonstrate they are not pre-existent.
We recommend the following steps to convert your applications:
1. Copy the applications from the OpenROAD 2006 (5.0) environment to the 5.1 environment.
2. Build and run the applications in OpenROAD 5.1.
3. Identify and correct any remaining issues.
4. Update the “About” dialog.
The following sections detail each of these steps.
Last modified date: 06/25/2024