Using SPX to Connect to a Windows Server
This section documents the use of SPX when connecting to a PSQL server running on a Windows machine.
Configuring PSQL to use SPX
SPX is not a native protocol on the Windows platforms. If you want to use SPX, perform the following procedures to ensure proper operation with PSQL.
Changing the configuration of PSQL to use SPX with a Windows platform
If you have both TCP/IP and SPX installed, you must remove TCP/IP from the PSQL Client configuration to make SPX function with PSQL applications
1
Access Control Center (PCC) from the operating system Start menu or Apps screen.
2
In the PSQL Explorer, expand Local Client.
3
Right-click MicroKernel Router and select Properties. Login if prompted.
4
Click Communication protocols. In the window to the right, a list of Supported protocols displays.
5
Clear TCP/IP from the list of selected protocols and click OK.
Changing Windows Configuration to Make SPX Run with PSQL
►
To Ensure that your SPX settings are correct
1
From the operating system, access the Network information.
2
Select the Properties for Local Area Connection.
3
Select the Properties of the SPX connection.
4
In the Frame Type field, ensure that the correct frame type for your network is selected. Do not use Auto Detect.
5
In the Network number field, enter a non-zero value for your network address. For information about what your network address should be, contact your system administrator.