• About This Document
• Status Codes
  • 0
    • Successful Interface Completion Status Code
      • 0: The interface completed successfully
  • 1 to 199
    • MicroKernel Engine Status Codes
      • 1: The operation parameter is invalid
      • 2: The application encountered an I/O error
      • 3: The file is not open
      • 4: The application cannot find the key value
      • 5: The record has a key field containing a duplicate key value
      • 6: The key number parameter is invalid
      • 7: The key number has changed
      • 8: The current positioning is invalid
      • 9: The operation encountered the end-of-file
      • 10: The key field is not modifiable
      • 11: The specified file name is invalid
      • 12: The MicroKernel cannot find the specified file
      • 13: The MicroKernel could not open the extension file for an extended file
      • 14: The MicroKernel cannot create or open the pre-image file
      • 15: The application encountered an I/O error during pre-imaging
      • 16: The application encountered an expansion error
      • 18: The disk is full
      • 19: The application encountered an unrecoverable error
      • 20: The MicroKernel or Btrieve Requester is inactive
      • 21: The key buffer parameter is too short
      • 22: The data buffer parameter is too short
      • 23: The position block parameter is not 128 bytes long
      • 24: The page size or data buffer size is invalid
      • 25: The application cannot create the specified file
      • 26: The number of keys specified is invalid
        • Conditions For Which Status Code 26 Is Returned
        • Nullable Columns
      • 27: The key position is invalid
      • 28: The record length is invalid
      • 29: The key length is invalid
      • 30: The file specified is not a MicroKernel file
      • 31: The file is already extended
      • 32: The file cannot be extended
      • 33: The MicroKernel cannot unload
      • 34: The specified extension name is invalid
      • 35: The application encountered a directory error
      • 37: Another transaction is active
      • 38: The MicroKernel encountered a transaction control file I/O error
      • 39: A Begin Transaction operation must precede an End/Abort Transaction operation
      • 40: The file access request exceeds the maximum number of files allowed
      • 41: The MicroKernel does not allow the attempted operation
      • 42: A file previously opened in Accelerated mode was not closed
      • 43: The specified record address is invalid
      • 44: The specified key path is invalid
      • 45: The specified key flags are invalid
      • 46: Access to the requested file is denied
      • 47: The number of files opened exceeds the maximum allowed
      • 48: The alternate collating sequence definition is invalid
      • 49: The extended key type is invalid
      • 50: The file owner is already set
      • 51: The owner name is invalid
      • 52: An error occurred while writing to the cache
      • 53: The language interface version is invalid
      • 54: The variable-length portion of the record is corrupt
      • 55: The application specified an invalid attribute for an AUTOINCREMENT key
      • 56: An index is incomplete
      • 57: An expanded memory error occurred
      • 58: The compression buffer length is too short
      • 59: The specified file already exists
      • 60: The specified reject count has been reached
      • 61: The work space is too small
      • 62: The descriptor is incorrect
      • 63: The data buffer parameter specified on an Insert Extended operation is invalid
      • 64: The filter limit has been reached
      • 65: The field offset is incorrect
      • 66: The maximum number of open databases has been exceeded
      • 67: The MicroKernel cannot open the SQL data dictionary files
      • 68: The MicroKernel cannot perform the RI Delete Cascade operation
      • 69: The Delete operation specified a file that is damaged
      • 71: There is a violation of the RI definitions
      • 72: The MicroKernel cannot open the RI referenced file
      • 73: The RI definition is out of sync
      • 75: The Btrieve operation has been canceled
      • 76: There is a conflict on the referenced file
      • 77: The application encountered a wait error
      • 78: The MicroKernel detected a deadlock condition
      • 79: A programming error occurred
      • 80: The MicroKernel encountered a record-level conflict
      • 81: The MicroKernel encountered a lock error
      • 82: The MicroKernel lost positioning
      • 83: The MicroKernel attempted to update or delete a record that was read outside the transaction
      • 84: The record or page is locked
      • 85: The file is locked
      • 86: The file table is full
      • 87: The handle table is full
      • 88: The application encountered an incompatible mode error
      • 89: A name error occurred
      • 90: The redirected device table is full
      • 91: The application encountered a server error
      • 92: The transaction table is full
      • 93: The record lock types are incompatible
      • 94: The application encountered a permission error
      • 95: The session is no longer valid
      • 96: A communications environment error occurred
      • 97: The data buffer is too small
      • 100: No cache buffers are available
      • 101: Insufficient operating system memory is available
      • 102: Insufficient stack space is available
      • 103: The chunk offset is too big
      • 104: The MicroKernel does not recognize the locale
      • 105: The file cannot be created with Variable-tail Allocation Tables (VATs)
      • 106: The MicroKernel cannot perform a Get Next Chunk operation
      • 107: The application attempted to perform a chunk operation on a pre-6.0 file
      • 109: An unknown error was encountered either creating or accessing a semaphore
      • 110: The MicroKernel cannot access the archival logging configuration file
      • 111: The specified file name was not found in the archival logging configuration file
      • 112: The specified file is in use by another client
      • 113: The MicroKernel is unable to open the archival log for the specified file
      • 114: The archival log for the specified file is invalid
      • 115: The MicroKernel cannot access the archival logging dump file
      • 116: The file is owned by another MicroKernel engine acting as a Gateway
      • 117: Invalid content detected in Continuous Operations delta file
      • 120: Maximum number of B-Tree index levels reached
      • 121: Start of defragmentation blocked by conflicting activity
      • 123: Defragmentation is not supported for certain types of files, such as key-only
      • 124: Defragmentation stopped because request to lock file access timed out with no response
      • 125: Defragmentation stopped because validation failed. No changes have been made to the file.
      • 126: Start of defragmentation blocked by insufficient free storage space
      • 127: Open file handles prevented completion of defragmentation.
      • 130: The MicroKernel ran out of system locks
      • 132: The file has reached its size limit
      • 133: More than 5 concurrent users attempted to access the same data file
      • 134: The MicroKernel cannot read the International Sorting Rule
      • 135: The specified ISR table is corrupt or otherwise invalid
      • 136: The MicroKernel cannot find the specified Alternate Collating Sequence in the file
      • 137: The operation with this access method is incompatible
      • 138: The NULL indicator position is invalid
      • 139: The MicroKernel has detected an unacceptable value in the key number
      • 143: The MicroKernel cannot allow unauthorized access to files in a secure MicroKernel database
      • 146: Duplicate system key
      • 147: The log segment is missing
      • 148: A roll forward error occurred
      • 149: SQL Trigger
      • 151: Chunk Offset Too Small
      • 160: Invalid parameters passed to MicroKernel
      • 161: A key has reached a maximum limit for user count, session count, or data in use, or has changed state to expired or disabled
      • 162: The client table is full
      • 163: The NULL indicator cannot be the last segment
      • 169: Protocol mismatch between client cache and remote engine
      • 170: Database login required
      • 171: Database login failed
      • 172: Database name not found
      • 173: Already logged in
      • 174: Logout failed
      • 175: Wrong database URI format
      • 176: File or table not specified in URI
      • 177: Table not in database
      • 178: Directory not in database
  • 1000 to 1999
    • MicroKernel Status Codes for Windows and DOS Workstations
      • 1001: The lock parameter is out of range
      • 1002: A memory allocation error occurred
      • 1003: An invalid memory size parameter was specified
      • 1006: The pre-image buffer parameter is out of range
      • 1007: The files parameter is out of range
      • 1008: The initialization parameter is invalid
      • 1009: The transaction file name parameter is invalid
      • 1010: An error occurred during the access of the transaction control file
      • 1011: The compression buffer parameter is out of range
      • 1012: Invalid /n: option
      • 1013: The task list is full
      • 1015: One of the pointer parameters passed to the MicroKernel is invalid
      • 1016: The MicroKernel is already initialized
      • 1017: The Btrieve Requester is unable to find the resource file WBTRVRES.DLL
      • 1018: The application attempted to call the MicroKernel from a Btrieve callback function
      • 1019: The MicroKernel canceled the current Btrieve operation at the request of the application’s Btrieve callback function
      • 1020: Btrieve Requester Interface communications error
      • 1021: The MicroKernel failed to initialize
      • 1022: The MicroKernel is shutting down
  • 2000 to 2099
    • Btrieve Requester Status Codes
      • 2000: Internal error
      • 2001: The memory allocation is insufficient
      • 2002: Invalid option
      • 2003: The Requester does not allow local access to the specified file
      • 2007: A pointer parameter is invalid
      • 2008: Router cannot find engine
      • 2009: Cannot load MicroKernel Router component
      • 2011: Btrieve requester resource DLL not loaded
      • 2012: The Btrieve requester encountered an operating system error
      • 2013: Filter request beyond the 128 limit
  • 2200 to 2299
    • XLT Status Codes
      • 2200: XLT Winsock Error
      • 2201: XLT RPC Error
  • 2300 to 2399
    • Named Database Status Codes
      • 2300: No more database names are defined
      • 2301: The database name is invalid
      • 2302: Invalid buffer length
      • 2303: The database name must be unique; the specified database name already exists
      • 2304: The database type is invalid
      • 2305: The specified path for data dictionary or data file locations is invalid
      • 2306: DBNAMES.CFG could not be updated
      • 2307: Cannot open DBNAMES.CFG file
      • 2308: The specified RI flag is invalid
      • 2309: The database is in use
      • 2312: The bound database cannot share table data files
      • 2313: The bound database cannot share data dictionary files
      • 2314: Cannot create DBNAMES.CFG file
      • 2316: Cannot create DDF files for the bound database
      • 2324: Data dictionary files are not bound
      • 2325: Data dictionary files are already bound
      • 2326: Data dictionary files are bound, but do not need to be bound
      • 2329: Data file for a table is not bound
      • 2330: Data file for a table is bound, but does not need to be bound
      • 2331: Not allowed to change data dictionary location and change name at the same time
      • 2332: Not allowed to bind database and change name at the same time
      • 2333: Not allowed to unbind database and change name at the same time
      • 2334: Not allowed to create a data dictionary files and change name at the same time
      • 2335: Not allowed to change data locations and change name at the same time
      • 2336: Not allowed to change data dictionary location and bind database at the same time
      • 2337: Not allowed to change data dictionary location and unbind database at the same time
      • 2338: Not allowed to change the dictionary location and create dictionary files at the same time
      • 2339: Not allowed to create data dictionary files and bind database at the same time
      • 2340: Not allowed to create data dictionary and unbind database at the same time
      • 2341: Not allowed to bind database and change data locations at the same time
      • 2342: Not allowed to unbind database and change data locations at the same time
      • 2343: Named database general error
      • 2351: Metadata version mismatch
  • 3000 to 3099
    • MicroKernel Router Status Codes
      • 3000: The MicroKernel router encountered a memory allocation error
      • 3001: Local access is unavailable to the MicroKernel router
      • 3002: The MicroKernel router resource DLL is unavailable
      • 3003: The MicroKernel router detected an incompatible network component
      • 3004: The MicroKernel is not responding to the MicroKernel router
      • 3005: The MicroKernel router encountered an operating system error
      • 3006: The MicroKernel router detected an invalid session
      • 3008: Invalid configuration for MicroKernel router
      • 3009: NETinterface.DLL is not loaded
      • 3012: Local engine is not accessible to the MicroKernel router
      • 3013: The remote engine is inaccessible to the MicroKernel router because the networking component is not loaded
      • 3014: The MicroKernel router cannot find an engine
      • 3015: The MicroKernel router encountered an initialization error
      • 3016: The MicroKernel router encountered an internal error
      • 3017: Data buffer of the local engine is too small
      • 3018: The file is already closed
      • 3019: The MicroKernel router encountered a semaphore error
      • 3020: An error occurred while loading the MicroKernel
      • 3021: The MicroKernel router received a badly formatted data packet
      • 3022: The MicroKernel router could not send the request to the remote engine because the specified data buffer length resulted in a data packet object that is too large
      • 3030: Remote access not allowed
      • 3031: Linux requester cannot connect to this server
      • 3032: Failed to initialize shared memory to local engine
  • 3100 to 3199
    • Network Services Layer Status Codes
      • 3103: Server name not found by Zen network services layer
      • 3104: The Zen network services layer encountered a permission error
      • 3105: No available transport protocol for the Zen network services layer
      • 3106: The Zen network services layer encountered a connection failure
      • 3107: The Zen network services layer is out of memory
      • 3108: The Zen network services layer detected an invalid session
      • 3110: The network layer is not connected
      • 3111: Failure during send to the target server
      • 3112: Failure during receive from the target server
      • 3114: The routing table of the Zen network services layer is full
      • 3115: Zen network services layer encountered a transport failure
      • 3116: Zen network services layer encountered a buffer mismatch
      • 3119: No authentication context is available
      • 3124: Zen network services layer task table is full
      • 3126: The Zen network services layer was unable to resolve the given file name into a valid path
      • 3131: Zen network services layer encountered an error while reconnecting
      • 3132: Unsupported Function
  • 4000 to 4099
    • Database Utilities Status Codes
      • 4083: Component not loaded
      • 4086: An internal error occurred. Utilities Requester receive size too small. Verify that the correct components are loaded
  • 5000 to 5999
    • Encryption Status Codes
      • 5000: Client requires encryption
      • 5001: Server requires encryption
  • 6000 to 6050
    • Data Dictionary Status Codes
      • 6002: Invalid Column
      • 6003: Foreign Key Not Found
      • 6005: Column Not Nullable
      • 6006: Invalid Data Type
      • 6007: Invalid Index Number
      • 6008: Too Many Segments
      • 6009: Index Name Duplicate
  • 7000 to 7050
    • Distributed Tuning Interface Status Codes
      • 7001: Invalid connection handle specified
      • 7002: NULL pointer specified
      • 7003: Buffer was too small
      • 7004: A general failure occurred
      • 7005: Invalid data type specified
      • 7006: Setting value is out of range
      • 7007: At least one selection item is invalid
      • 7008: Invalid sequence number
      • 7009: Data on open files is not available
      • 7010: Client ID is invalid
      • 7011: Insufficient access rights
      • 7012: Named database already exists
      • 7013: Named database does not exist
      • 7014: DTI not initialized
      • 7015: File not open
      • 7016: Dictionary files already exist
      • 7017: Dictionary path in use
      • 7018: Invalid DSN name
      • 7019: DSN already exists
      • 7020: Specified DSN does not exist
      • 7021: Invalid open mode for DSN
      • 7022: Component not loaded
      • 7023: The database files cannot be deleted because they are shared with another database
      • 7024: Invalid Btrieve Security Policy
      • 7025: Server name not found
      • 7026: Requester not loaded
      • 7027: Server table full
      • 7028: Client connections limit exceeded
      • 7029: Permissions Error
      • 7030: Out of memory
      • 7031: No transport is available
      • 7032: Connection failure
      • 7033: Connection was lost
      • 7034: Database name is too long
      • 7035: Insufficient number of data paths
      • 7036: File name already exists
      • 7037: Password is invalid
      • 7038: Destination data path is invalid
      • 7039: Dictionary path is invalid
      • 7040: Filter option is invalid
      • 7041: Cannot perform operation because database entries in FILE.DDF contain absolute paths
      • 7042: Bound database requires data dictionary files
      • 7043: Invalid character sent by client
      • 7044: Invalid character received by client
      • 7045: Internal buffer too small
      • 7046: Invalid encoding translation option
      • 7047: Invalid code page for database
      • 7048: Invalid operation
      • 7049: Cannot create DDFs due to metadata version mismatch with existing DDFs in the location provided
  • 7064 to 7140
    • License Administrator Status Codes
      • 7064: No license obtained for the product
      • 7065: A product has not been obtained
      • 7101: Invalid character in the license string
      • 7102: Illegal license type is defined
      • 7108: License key length is too long
      • 7109: No such license exists
      • 7110: Only temporary licenses are installed on the system and all of them have expired
      • 7111: Temporary licenses cannot be deauthorized. The license becomes invalid after its expiration date.
      • 7112: License is already installed
      • 7113: Invalid license key. Verify the provided key
        • Special consideration for telephone authorization
      • 7115: Invalid product ID
      • 7116: Buffer overflow
      • 7117: License key is too long
      • 7118: The server is not running. Unable to show, authorize, or deauthorize a license. Verify that the server is running and that network communications are functioning.
      • 7119: The local server is not running. Unable to show, authorize, or deauthorize a license.
      • 7120: The license cannot be deauthorized
      • 7122: Your trial license has expired
      • 7124: An increase key for user count, session count, or data in use must have a vendor ID that matches the vendor ID of an authorized permanent key
      • 7125: An active permanent license already exists
      • 7126: Cannot increase the value beyond the maximum limit for user count, session count, or data in use
      • 7127: This key or a related key requires deauthorization. This version of the client cannot deauthorize a key.
      • 7130: The Zen product version for this key does not match the installed Zen engine
      • 7131: The OS platform for this key does not match the installed Zen engine
      • 7132: The Zen engine type for this key does not match the installed Zen engine
      • 7133: An associated UCI key is preventing the deauthorization of the permanent key. The UCI key may already be in the failed or disabled state, or it may be set to transition into the failed state the next time it is validated. Repair the UCI key and try again to deauthorize the permanent key.
      • 7140: The operation is not supported on this version of the engine.
  • 7200 to 7499
    • Authorization Status Codes
      • 7201: An error in one of the authorization libraries prevents further processing
      • 7212: Invalid product key for authorization
      • 7213: Product key does not pass checksum validation for authorization
      • 7215: Unable to determine machine ID. Verify you are logged on with administrator permissions and retry.
      • 7218: Debug entry logged pertaining to acquiring the machine configuration
      • 7221: Authorizing or deauthorizing a key requires database engine to be running
      • 7222: DTI call could not be completed or there is a problem connecting to the engine
      • 7223: DTI returned invalid license string
      • 7224: User lacks the appropriate rights to authorize or deauthorize a key
      • 7226: Deauthorizing a key requires an authorized key
      • 7235: Product authorization is not supported on this version of Zen
      • 7239: Internet connection cannot access authorization server
      • 7241: Authorization service support files not found
      • 7252: Authorization key is invalid for the target machine
      • 7254: Key cannot be authorized because it contains invalid license data. Contact your product key vendor.
      • 7260: The offline data does not pass validation
      • 7261: Error encountered while saving the offline authorization request data file
      • 7262: Error encountered while loading the offline authorization key data file
      • 7264: Product key is invalid
      • 7265: Authorization of the authorization key data must be on the same machine where the authorization request data was generated
      • 7267: This stage of the offline authorization is invalid or inconsistent with the requested offline operation
      • 7268: Offline authorization must be performed locally
      • 7269: An internal error occurred while trying to process the offline operation on the local machine
      • 7300: Local licensing component incompatible with remote licensing server
      • 7305: Product key not found in authorization database
      • 7306: Product key is not in a valid state
      • 7310: Product key has been disabled in the authorization database
      • 7311: Product Key is not a valid length
      • 7313: Product key is already used on a different machine
      • 7314: This key cannot be deauthorized because it was authorized on a machine with a different machine signature. Either it is being used on a different machine or, more likely, the hardware signature of the original machine has changed. If you are cloning or copying a key licensed for use on only one machine, please purchase another valid license key. Otherwise, repair the key, then try again to deauthorize it.
      • 7315: Product key is already used on this machine
      • 7317: Deauthorizing a key requires an authorized key
      • 7334: Key has no machine signature associated with it
      • 7335: Operation is not allowed on a Multimachine Key
      • 7336: Authorization server prohibits authorization from within a Virtual Machine session
      • 7337: The number of cores in the system exceeds the maximum allowed by the product key.
      • 7338: Authorization not allowed in debug mode
      • 7340: Product key cannot be authorized because the maximum usage count has been reached. Contact your product key vendor.
      • 7341: Product key cannot be authorized because the maximum number of authorizations has been reached. Contact your product key vendor.
      • 7342: Product key cannot be deauthorized because the maximum number of deauthorizations has been reached. Contact your product key vendor.
      • 7343: Product key cannot be repaired because the maximum number of repairs has been reached. Contact your product key vendor.
      • 7346: Product key has been authorized on the maximum number of machines allowed. Contact your product key vendor.
      • 7347: Maximum number of offline authorizations has been reached. Contact your product key vendor.
      • 7348: Temporary License key cannot be deauthorized
      • 7349: Temporary License key has already been authorized
      • 7365: Record changes were blocked due to multi-user access
      • 7366: Authorization server is busy
      • 7367: Multi-user access is preventing the operation from being completed
      • 7369: The server is currently unavailable. Please try again later.
      • 7380: The Country or City is in the embargo list
      • 7422: Login failed. The user credentials are invalid.
      • 7423: Permission for requested operation has been denied
      • 7424: User account is inactive
      • 7449: Key cannot be set to active because of a pending issue with the key vendor. Contact your product key vendor.
      • 7450: OEM ID does not exist
      • 7451: OEM account is inactive
      • 7452: OEM user is inactive
      • 7456: Invalid OEM user ID for the requested record
      • 7457: OEM product (Workgroup/Server) is not an authorized product
      • 7458: Maximum number of resets or repairs for the product key has been reached
      • 7471: Maximum number of seats for this OEM has been reached
      • 7472: Maximum number of licenses for this OEM has been reached
      • 7473: Maximum number of seats for this OEM account has been reached
      • 7474: Maximum number of licenses for this OEM account has been reached
      • 7475: Invalid value for user count, session count, or data in use
      • 7477: The OS Platform type is invalid for this account
      • 7478: Product type is invalid for this account
      • 7479: Upgrade type is invalid for this account
  • 8000 to 8499
    • Component Management Status Codes
      • 8005: Interface not initialized
      • 8006: The specified component was not found
      • 8020: Error loading component
      • 8022: Component not initialized
      • 8097: General security error
      • 8099: Only one user may be connected when turning database security on or off
  • 8500 to 8589
    • ECAS Interface Status Codes
      • 8500: An error occurred during the components initialization
      • 8502: An error occurred when trying to locate W3UPIXYY.DLL
      • 8503: An invalid W3UPIXYY.DLL has been found
      • 8504: An error occurred when trying to create system semaphore
      • 8505: An initialization error occurred when trying to establish a session with the Zen engine
      • 8506: A fatal error occurred when loading the MicroKernel
      • 8507: No valid session was found
      • 8508: An error occurred when attempting to enable Btrieve access
      • 8509: A timeout occurred during the initialization of the MicroKernel
      • 8510: A fatal error occurred when loading the Scalable SQL engine
      • 8511: An error occurred when attempting to enable SQL access
      • 8512: A timeout occurred during the initialization of the Scalable SQL engine
      • 8513: An error occurred when disabling Btrieve access
      • 8514: An error occurred when unloading the MicroKernel
      • 8515: An error occurred when disabling SQL access
      • 8516: An error occurred when unloading the Scalable SQL engine
      • 8517: An error occurred when closing the session with the Zen engine
      • 8518: An error occurred when attempting to allocate system memory
      • 8519: A fatal error occurred when loading the SRDE
      • 8520: A timeout occurred during the initialization of the SRDE module
      • 8521: An error occurred when unloading the SRDE module
  • 8590 to 8599
    • Database Engine Service Status Codes
      • 8590: An error occurred in the database manager while initializing Components Manager
      • 8591: The database manager is already loaded
      • 8592: Insufficient memory to load the database manager
      • 8593: An error occurred while the database manager was creating a system thread
      • 8594: Engine cannot be restarted
  • 10000 to 10100
    • SQL Connection Manager Codes
      • 10000 through 10064: You have been unexpectedly disconnected from the server
      • 10065: Connection attempt timed out
  • -1000 to -5300
    • Relational Engine Status Codes
      • -1003: Invalid API parameter
      • -1011: Out of memory
      • -1020: No more file handles
      • -1024: File share violation
      • -1026: Record size limit exceeded
      • -1032: File access denied
      • -1040: Too many columns defined
      • -1113: Too many active sessions
      • -1206: Non-db file or corrupted db
      • -1207: Database exclusively locked
      • -1250: Same column cannot be renamed and modified
      • -1251: Multiple columns may not be renamed to the same name
      • -1252: Column may not be renamed multiple times
      • -1302: Table is exclusively locked
      • -1303: Table already exists
      • -1304: Table is in use, cannot perform operation
      • -1305: No such table or object
      • -1309: No DDLs without exclusive lock
      • -1312: View already exists
      • -1313: Trigger already exists
      • -1314: No such table exists
      • -1315: No such view exists
      • -1316: No such trigger exists
      • -1317: No such index exists
      • -1403: Duplicate index exists
      • -1404: No such index
      • -1504: Null not valid
      • -1507: No such column
      • -1508: Field is already defined
      • -1513: Index column type not supported
      • -1520: Key length is invalid
      • -1603: Currency not on a record
      • -1605: Illegal duplicate key
      • -1809: Permission denied
      • -1810: You are not authorized to perform this operation
      • -1902: Unable to log on. An invalid Username/Password may have been specified
      • -1903: Invalid account name
      • -1905: Invalid password
      • -1907: Access denied
      • -3001: User-defined functions with the same name already exist
      • -3002: The user-defined function name is invalid. User-defined function name can contain 1 to 30 characters
      • -3003: Cannot insert into a COBOL data file. Invalid operation
      • -3005: Cannot alter a COBOL fake table. Invalid operation
      • -3006: Cannot create triggers on COBOL tables. Invalid operation
      • -3007: Cannot create indexes on OCCURS/REDEFINES fields. Invalid operation
      • -3008: A dependent OCCURS table entry exists. Drop this OCCURS table to drop the main table
      • -3009: There is a dependent REDEFINES table. Drop this REDEFINES table to drop the main table
      • -3010: An OCCURS table with a mapping index to this index exists. Cannot drop index
      • -3011: A push-down filter has been defined on this column. This column cannot be updated
      • -3012: Only CREATE INDEX IN DICTIONARY operation is supported for COBOL fake main table and variant records
      • -3014: Trigger already exists
      • -3015: Procedure already exists
      • -3016: The fixed-portion size of a record exceeds 65535 bytes
      • -3017: Invalid path/file name
      • -3018: Invalid data type conversion to an identity column
      • -3019: Cannot drop a system table
      • -3020: Invalid USING path/file name
      • -3021: Invalid IN DICTIONARY
      • -3022: Invalid BLOB/CLOB data type in legacy table that contains NOTE/LVAR
      • -3023: Data type mismatch
      • -3024: String or binary data truncation error
      • -3025: Arithmetic overflow error
      • -3026: Invalid NULL conversion
      • -3027: Invalid foreign key constraint name
      • -3028: Invalid password
      • -3029: Invalid group or user name
      • -3030: Invalid procedure or trigger name
      • -3031: MKC library cannot be loaded
      • -3032: Column in use by primary key
      • -3033: Column in use by foreign key
      • -3034: Type cannot be null
      • -3035: Length of the foreign key is incompatible
      • -3036: Scale of the foreign key is incompatible
      • -3037: Precision of the foreign key is incompatible
      • -3038: Data Type of the foreign key is incompatible
      • -3039: Trigger dependency
      • -3040: Group already exists
      • -3041: User already exists
      • -3043: Table referenced by foreign key
      • -3044: Too many levels of trigger recursion
      • -3045: Index in use by foreign key
      • -3046: Integrity Constraint Violation
      • -3047: RI no matching primary key
      • -3048: Invalid page size
      • -3049: Invalid free space threshold
      • -3050: Invalid page number
      • -3051: The dictionary is in use
      • -3052: Dictionary already exists
      • -3053: RI table does not exist
      • -3054: Duplicate savepoint name error
      • -3055: Only one Alternate Collating Sequence per index
      • -3056: Add Nullable column in legacy table
      • -3057: Conflicting collation
      • -3058: Drop last column
      • -3059: Database could not find dictionary files
      • -3060: Constraint already exists
      • -3061: Invalid constraint name
      • -3062: Database has no security
      • -3063: Database already secured
      • -3064: Alter legacy table
      • -3065: Invalid login
      • -3066: Group not found
      • -3067: Group not empty
      • -3068: Not allowed to define synonym for Public
      • -3069: Not allowed to drop Public
      • -3070: Not allowed to drop Administrator
      • -3071: Cannot revoke synonym privileges
      • -3072: Cannot grant synonym privileges
      • -3073: Privileges cannot be revoked from Administrator
      • -3075: Conversion rename error
      • -3076: Conversion delete error
      • -3077: Bad index name
      • -3078: Bad column name
      • -3079: Bad table name
      • -3080: Data not bound
      • -3081: Wrong DDF bind information
      • -3082: DDF already bound
      • -3083: DDF not bound
      • -3084: Shared DDF
      • -3085: Shared data file
      • -3086: Index in use by primary key
      • -3087: Primary key already exists
      • -3088: Incompatible file version
      • -3089: Inconsistent multipath
      • -3090: Delete connected cycle
      • -3091: Self referencing delete not cascade
      • -3092: RI synchronization
      • -3093: Trigger RI conflict
      • -3094: Invalid delete rule
      • -3095: Invalid update rule
      • -3096: Object in use
      • -3097: Invalid collate
      • -3098: Number out of range
      • -3099: Foreign key invalid database name
      • -3348: Cannot create DDFs due to metadata version mismatch with existing DDFs in the location provided
      • -3358: Not allowed to unbind database and change data locations at the same time
      • -3359: Not allowed to bind database and change data locations at the same time
      • -3360: Not allowed to create data dictionary and unbind database at the same time
      • -3362: Not allowed to change the dictionary location and create dictionary files at the same time
      • -3363: Not allowed to change data dictionary location and unbind database at the same time
      • -3364: Not allowed to change data dictionary location and bind database at the same time
      • -3365: Not allowed to change data locations and change name at the same time
      • -3366: Not allowed to create a data dictionary files and change name at the same time
      • -3367: Not allowed to unbind database and change name at the same time
      • -3368: Not allowed to bind database and change name at the same time
      • -3369: Not allowed to change data dictionary location and change name at the same time
      • -3370: Data file for a table is bound, but does not need to be bound
      • -3371: Data file for a table is not bound
      • -3374: Data dictionary files are bound, but do not need to be bound
      • -3375: Data dictionary files are already bound
      • -3376: Data dictionary files are not bound
      • -3383: Cannot create DDF files for the bound database
      • -3385: Cannot create DBNAMES.CFG file
      • -3386: The bound database cannot share data dictionary files
      • -3387: The bound database cannot share table data files
      • -3390: The database is in use
      • -3391: The specified RI flag is invalid
      • -3392: Cannot open DBNAMES.CFG file
      • -3393: DBNAMES.CFG could not be updated
      • -3394: The specified path for data dictionary or data file locations is invalid
      • -3395: The database type is invalid
      • -3396: The database name must be unique; the specified database name already exists
      • -3397: Invalid buffer length
      • -3398: The database name is invalid
      • -3399: No more database names are defined
      • -3401: Invalid column-level GRANT statement
      • -3473: The Zen network services layer was unable to resolve the given file name into a valid path
      • -3475: Zen network services layer task table is full
      • -3480: No authentication context is available
      • -3484: Zen network services layer encountered a transport failure
      • -3485: The routing table of the Zen network services layer is full
      • -3487: Failure during receive from the target server
      • -3488: Failure during send to the target server
      • -3489: The network layer is not connected
      • -3491: The Zen network services layer detected an invalid session
      • -3492: The Zen network services layer is out of memory
      • -3493: The Zen network services layer encountered a connection failure
      • -3494: No available transport protocol for the Zen network services layer
      • -3495: The Zen network services layer encountered a permission error
      • -3496: Server name not found by Zen network services layer
      • -3777: The MicroKernel router could not send the request to the remote engine because the specified data buffer length resulted in a data packet object that is too large
      • -3778: The MicroKernel router received a badly formatted data packet
      • -3779: An error occurred while loading the MicroKernel
      • -3780: The MicroKernel router encountered a semaphore error
      • -3781: The file is already closed
      • -3782: Data buffer of the local engine is too small
      • -3783: The MicroKernel router encountered an internal error
      • -3784: The MicroKernel router encountered an initialization error
      • -3785: The MicroKernel router cannot find an engine
      • -3786: The remote engine is inaccessible to the MicroKernel router because the networking component is not loaded
      • -3787: Local engine is not accessible to the MicroKernel router
      • -3790: NETinterface.DLL is not loaded
      • -3791: Invalid configuration for MicroKernel router
      • -3793: The MicroKernel router detected an invalid session
      • -3794: The MicroKernel router encountered an operating system error
      • -3795: The MicroKernel is not responding to the MicroKernel router
      • -3796: The MicroKernel router detected an incompatible network component
      • -3797: The MicroKernel router resource DLL is unavailable
      • -3798: Local access is unavailable to the MicroKernel router
      • -3799: The MicroKernel router encountered a memory allocation error
      • -4001: No relational operator found in the specified push-down filter
      • -4002: Specified push-down filter field not found in the table
      • -4003: The push-down filter specified contains invalid relational operator
      • -4837: The client table is full
      • -4838: A key has reached a maximum limit for user count, session count, or data in use, or has changed state to expired or disabled.
      • -4850: Problem Firing Trigger
      • -4851: A roll forward error occurred
      • -4852: The log segment is missing
      • -4853: Duplicate sys key
      • -4856: The MicroKernel cannot allow unauthorized access to files in a secure MicroKernel database
      • -4860: The MicroKernel has detected an unacceptable value in the key number
      • -4861: The NULL indicator position is invalid
      • -4863: The MicroKernel cannot find the specified Alternate Collating Sequence in the file
      • -4864: The specified ISR table is corrupt or otherwise invalid
      • -4865: The MicroKernel cannot read the International Sorting Rule
      • -4866: More than 5 concurrent users attempted to access the same data file
      • -4867: The file has reached its size limit
      • -4869: The MicroKernel ran out of system locks
      • -4884: The file is owned by another MicroKernel engine acting as a Gateway
      • -4885: The MicroKernel cannot access the archival logging dump file
      • -4886: The archival log for the specified file is invalid
      • -4887: The MicroKernel cannot find the archival log for the specified file
      • -4888: The specified file is in use by another client
      • -4889: The specified file name was not found in the archival logging configuration file
      • -4890: The MicroKernel cannot access the archival logging configuration file
      • -4891: An unknown error was encountered either creating or accessing a semaphore
      • -4892: The application attempted to perform a chunk operation on a pre-6.0 file
      • -4893: The MicroKernel cannot perform a Get Next Chunk operation
      • -4894: The file cannot be created with Variable-tail Allocation Tables (VATs)
      • -4895: The MicroKernel does not recognize the locale
      • -4896: The chunk offset is too big
      • -4897: Insufficient stack space is available
      • -4898: Insufficient operating system memory is available
      • -4899: No cache buffers are available
      • -4902: The data buffer is too small
      • -4903: A communications environment error occurred
      • -4904: The session is no longer valid
      • -4905: The application encountered a permission error
      • -4906: The record lock types are incompatible
      • -4907: The transaction table is full
      • -4908: The application encountered a server error
      • -4909: The redirected device table is full
      • -4910: A name error occurred
      • -4911: The application encountered an incompatible mode error
      • -4912: The handle table is full
      • -4913: The file table is full
      • -4914: File is locked
      • -4915: Record is locked
      • -4916: The MicroKernel attempted to update or delete a record that was read outside the transaction
      • -4917: The MicroKernel lost positioning
      • -4918: The MicroKernel encountered a lock error
      • -4919: The MicroKernel encountered a record-level conflict
      • -4920: A programming error occurred
      • -4921: The MicroKernel detected a deadlock condition
      • -4922: The application encountered a wait error
      • -4923: There is a conflict on the referenced file
      • -4926: The RI definition is out of sync
      • -4927: The MicroKernel cannot open the RI referenced file
      • -4928: There is a violation of the RI definitions
      • -4930: The Delete operation specified a file that is damaged
      • -4931 The MicroKernel cannot perform the RI Delete Cascade operation
      • -4932: The MicroKernel cannot open the SQL data dictionary files
      • -4933: The maximum number of open databases has been exceeded
      • -4934: The field offset is incorrect
      • -4935: The filter limit has been reached
      • -4936: The data buffer parameter specified on an Insert Extended operation is invalid
      • -4937: The descriptor is incorrect
      • -4938: The work space is too small
      • -4939: The specified reject count has been reached
      • -4940: The specified file already exists
      • -4941: The compression buffer length is too short
      • -4942: An expanded memory error occurred
      • -4943: An index is incomplete
      • -4944: The application specified an invalid attribute for an AUTOINCREMENT key
      • -4945: The variable-length portion of the record is corrupt
      • -4946: The language interface version is invalid
      • -4947: An error occurred while writing to the cache
      • -4948: The owner name is invalid
      • -4949: The file owner is already set
      • -4950: The extended key type is invalid
      • -4951: The alternate collating sequence definition is invalid
      • -4952: The number of files opened exceeds the maximum allowed
      • -4953: Access to the requested file is denied
      • -4954: The specified key flags are invalid
      • -4955: The specified key path is invalid
      • -4956: The specified record address is invalid
      • -4957: A file previously opened in Accelerated mode was not closed
      • -4958: The MicroKernel does not allow the attempted operation
      • -4959: The file access request exceeds the maximum number of files allowed
      • -4960: A Begin Transaction operation must precede an End/Abort Transaction operation
      • -4961: The MicroKernel encountered a transaction control file I/O error
      • -4962: Another transaction is active
      • -4964: The application encountered a directory error
      • -4965: The specified extension name is invalid
      • -4966: The MicroKernel cannot unload
      • -4967: The file cannot be extended
      • -4968: The file is already extended
      • -4969: The file specified is not a MicroKernel file
      • -4970: The key length is invalid
      • -4971: The record length is invalid
      • -4972: The key position is invalid
      • -4973: The number of keys specified is invalid
      • -4974: The application cannot create the specified file
      • -4975: The page size or data buffer size is invalid
      • -4976: The position block parameter is not 128 bytes long
      • -4977: The data buffer parameter is too short
      • -4978: The key buffer parameter is too short
      • -4979: The MicroKernel or Btrieve Requester is inactive
      • -4980: The application encountered an unrecoverable error
      • -4981: The disk is full
      • -4983: The application encountered an expansion error
      • -4984: The application encountered an I/O error during pre-imaging
      • -4985: The MicroKernel cannot create or open the pre-image file
      • -4986: The MicroKernel could not open the extension file for an extended file
      • -4987: The MicroKernel cannot find the specified file
      • -4988: The specified file name is invalid
      • -4989: The key field is not modifiable
      • -4990: The operation encountered the end-of-file
      • -4991: The current positioning is invalid
      • -4992: The key number has changed
      • -4993: The key number parameter is invalid
      • -4994: The record has a key field containing a duplicate value
      • -4995: The application cannot find the key value
      • -4996: The file is not open
      • -4997: The application encountered an I/O error
      • -4998: The operation parameter is invalid
      • -5022: Columns in the selection list and the returns clause do not match
      • -5025: Only IN parameter types allowed for user-defined functions
      • -5027: Invalid Syntax. The last statement included within a function must be a return statement
      • -5031: Default value cannot have the same UDF name as the UDF being created
      • -5032: RETURN statements in a UDF must have an argument
      • -5099: Error condition pertaining to a stored procedure
      • -5202: Record is locked
      • -5204: Table is not open
      • -5208: Invalid date
      • -5219: Translation failed
      • -5220: Invalid procedure name
      • -5221: Invalid predicate name
      • -5222: Invalid Code Page value
      • -5223: User-defined function name cannot be same as built-in function name
      • -5225: Cannot drop an in-built function or an aggregate function
      • -5226: Cannot invoke a user-defined function using CALL statement
      • -5229: Invalid user-defined or scalar function
      • -5230: No such stored procedure
      • -5231: Stored procedure already exists
      • -5232: UDF already exists
      • -5233: Only database qualifier is allowed
      • -5235: Domain Authentication Failed
      • -5236: Bad Domain User Name or Password
      • -5237: No Zen Group Associated to Domain User
      • -5238: Multiple Zen Groups Associated to Domain User
      • -5239: Domain Authentication is a Windows Platform Security Option
      • -5240: The RPC Server is Unavailable
      • -5241: Session Credential Conflict Error
      • -5243: Specified column number is not valid
      • -5245: Procedure/view permissions not supported on this metadata version
      • -5247: This feature is not supported for the current metadata version
      • -5248: Invalid partial column
  • -100 to -199
    • Informative Status Codes
      • -101: The SET statement completed successfully
      • -102: The INSERT statement completed successfully
      • -103: The UPDATE statement completed successfully
      • -104: The DELETE statement completed successfully
      • -105: The CREATE statement completed successfully
      • -106: The ALTER TABLE statement completed successfully
      • -107: The DROP statement completed successfully
      • -108: The statement contains unresolved substitution variables and cannot be executed
      • -109: The view contains no more records
      • -110: The GRANT statement completed successfully
      • -111: The REVOKE statement completed successfully
      • -112: The START TRANSACTION statement completed successfully
      • -113: The COMMIT WORK statement completed successfully
      • -114: The ROLLBACK WORK statement completed successfully
      • -115: The MicroKernel successfully recalled the stored SQL statement
      • -116: The MicroKernel successfully executed the stored SQL statement
      • -118: The DECLARE statement completed successfully
      • -119: The SET assignment statement completed successfully
      • -120: The OPEN statement completed successfully
      • -121: The CLOSE statement completed successfully
      • -122: The FETCH statement completed successfully
      • -123: The positioned UPDATE statement completed successfully
      • -124: The positioned DELETE statement completed successfully
      • -125: The CALL stored procedure statement completed successfully
• Messages
  • (No prefix)
    • Generic Messages
      • Bfloat and Float Fields Must Be 4 or 8 Bytes
      • Column level permissions not allowed on views
      • First and Second Password Entries Do Not Match, Please Retype
      • Incorrect Parameter
      • Insufficient Memory
      • Invalid Load File Format. End of Record Marker Not Found
      • Local Engine Is Already Loaded
      • Must Have DOS 3.1 or Greater
      • Only Master user name can be specified in Execute As clause
      • Redirection List Not Large Enough
      • Specifying EXECUTE privilege for a Table is illegal
      • Specifying REFERENCES or EXECUTE privilege for a view is illegal
      • Specifying SELECT, INSERT, UPDATE, DELETE or REFERENCES privilege for a Procedure is illegal
      • SQL Requester Is Already Loaded
  • BREQUTIL
    • Requester Utility Messages
      • BREQUTIL-8: MicroKernel or MKDE Requester is not loaded
      • BREQUTIL-9: MKDE operation nn was unsuccessful. The number of the applicable MKDE status code is nn
      • BREQUTIL-16: MicroKernel or MKDE Requester cannot be removed from memory while the MKDE is loaded
  • BUTIL
    • Maintenance Utility Messages
      • BUTIL-1: Message file initialization failed
      • BUTIL-2: Message file initialization failed. BUTIL was unable to access BTIUTILD.MSG
      • BUTIL-6: The BUTIL command is invalid
      • BUTIL-8: The command completed, but one or more errors occurred
      • BUTIL-9: The command did not complete due to an unrecoverable error
      • BUTIL-10: The command line contains a syntax error
      • BUTIL-11: The command line requires the index file
      • BUTIL-12: The command line requires the key number
      • BUTIL-13: The key size for key of type xxxx is invalid
      • BUTIL-14: The file that caused the error was <filename>
      • BUTIL-15: Error occurred on key segment descriptor xxx of description file
      • BUTIL-16: BUTIL could not open the description file
      • BUTIL-18: An error occurred during access of the sequential file
      • BUTIL-19: BUTIL could not open the alternate collating sequence file
      • BUTIL-20: An error occurred during access of the alternate collating sequence file
      • BUTIL-21: The file version is earlier than 6.0
      • BUTIL-23: The /D parameter specified to the Requester was too small for BUTIL to receive the entire record. BUTIL is writing only nn bytes
      • BUTIL-25: The /D parameter specified to BUTIL was too small for BUTIL to receive any part of the record
      • BUTIL-26: The data buffer is too small to hold any part of the record
      • BUTIL-27: An error occurred during the access of the variable page. BUTIL is writing the obtainable portion of the variable page.
      • BUTIL-30: The key position cannot exceed the record length
      • BUTIL-31: The key position plus key length cannot exceed the record length
      • BUTIL-32: The key length must be an even number for key type xxxx
      • BUTIL-36: The page size must be a multiple of 512, from 512 to 4,096
      • BUTIL-37: The record length cannot exceed the page size
      • BUTIL-38: The record length must be at least 4 and no greater than 4,096
      • BUTIL-41: The alternate collating sequence cannot be found
      • BUTIL-43: The file exists, but the Replace option was not specified
      • BUTIL-44: The file access error nn occurred for file filename
      • BUTIL-45: The number of duplicate keys must be between 1 and 119
      • BUTIL-47: BUTIL cannot open the command file
      • BUTIL-48: The command file is empty
      • BUTIL-49: The command file exceeds 1,000 bytes
      • BUTIL-50: An internal error caused BUTIL to terminate
      • BUTIL-52: MKDE cannot be stopped when SQL is loaded
      • BUTIL-53: MKDE error nn occurred for file or command xxxx
      • BUTIL-60: The end of the file occurred while BUTIL was expecting keyword xxxx on key segment descriptor nn
      • BUTIL-61: The end of the file occurred while BUTIL was expecting keyword xxxx
      • BUTIL-62: BUTIL was expecting keyword xxxx on key segment descriptor nn
      • BUTIL-63: BUTIL was expecting keyword xxxx
      • BUTIL-65: BUTIL has loaded no records
      • BUTIL-66: BUTIL has loaded nn records so far
      • BUTIL-70: The MKDE error nn occurred on closing a file
      • BUTIL-74: MKDE error nn was returned for the Stop Command
      • BUTIL-76: When BUTIL wrote the Page Allocation Table at page #nn, an error occurred
      • BUTIL-77: When BUTIL wrote a mirror copy of the Page Allocation Table at page #nn, an error occurred
      • BUTIL-82: Error occurred on file specification of the description file
      • BUTIL-84: BUTIL internal error
      • BUTIL-90: BUTIL could not allocate enough memory
      • BUTIL-91: BUTIL could not determine the size of the file
      • BUTIL-100: An internal status code nn
      • BUTIL-101: The list of files that were not processed is: list
      • BUTIL-102: A Roll Forward error occurred
      • BUTIL-103: Log segment number nn is missing
      • BUTIL-131: BUTIL was unable to create or open the sequential file
      • BUTIL-132: The disk volume is full
      • BUTIL-134: BUTIL was unable to create or open the new file
      • BUTIL-136: BUTIL was unable to write the new backup file
      • BUTIL-141: File xx has an invalid extension. This extension is reserved for extended unformatted files
      • BUTIL-142: File xx exists
      • BUTIL-143: File xx exists. This file is a potential extension of file yy. Remove this file and other potential extension files in this directory
      • BUTIL-144: File xx has reached the size limit. The utility created one or more extension files. The last extension file is yy
      • BUTIL-145: The utility found file xx. Remove this file before loading data from file yy
      • BUTIL-146: The source file and output file cannot be the same.
      • BUTIL-147: The utility cannot read record number xx due to MicroKernel error yy. The utility will attempt to read the remaining records from the opposite direction.
      • BUTIL-148: Program aborted by user
      • BUTIL-149: The utility cannot create a temporary file in the current directory to process the STAT command.
      • BUTIL-152: There was an error opening file filename
      • BUTIL-155: BUTIL cannot open the file filename
      • BUTIL-156: Failed to login to database. MicroKernel status xx is returned
      • BUTIL-157: Failed to logout from database. MicroKernel status xx is returned
      • BUTIL-158: Invalid level value. Level must be 0, 1, 2, or 3.
  • MKDE
    • MicroKernel Engine Messages
      • MKDE-12: The value specified for the –option is invalid
      • MKDE-13: The option specified is not a valid option
      • MKDE-16: There is insufficient memory to load the MicroKernel Engine
      • MKDE-20: The log file filename cannot be written. Check disk space
      • MKDE-25: The file filename is rolling back
      • MKDE-51: Program initialization failed; the program was not loaded
      • MKDE-57: The file filename cannot be created in the log segment directory xxxx
      • MKDE-58: The file filename cannot be opened in the log segment directory xxxx
      • MKDE-59: The log segment file filename cannot be created
      • MKDE-75: The log file format is invalid
      • MKDE-76: An Open operation failed on “xxxx” with MKDE error nn
      • MKDE-77: An unexpected MKDE error nn occurred on INSERT to “xxxx”
      • MKDE-78: An unexpected MKDE error nn occurred on UPDATE in “xxxx”
      • MKDE-79: An unexpected MKDE error nn occurred on DELETE from “xxxx”
      • MKDE-80: The system is out of memory
      • MKDE-81: An internal error nn occurred
      • MKDE-82: An unexpected MKDE error nn occurred on GET EQUAL in “xxxx”
      • MKDE-83: The log file is corrupt
      • MKDE-84: An error occurred while reading the log file
      • MKDE-85: An unexpected MKDE error nn occurred on CREATE INDEX to filename
      • MKDE-86: An unexpected MKDE error nn occurred on DROP INDEX to filename
      • MKDE-87: An unexpected MKDE error nn occurred on BEGIN TRANSACTION to filename
      • MKDE-88: An unexpected MKDE error nn occurred on END TRANSACTION to filename
      • MKDE-89: An unexpected MKDE error nn occurred on ABORT TRANSACTION to filename
      • MKDE-90: An unexpected MKDE error nn occurred on CLOSE to filename
      • MKDE-91: An unexpected MKDE error nn occurred on GET POSITION to filename
      • MKDE-92: An unexpected MKDE error nn occurred on BEGIN TRANSACTION
      • MKDE-93: An unexpected MKDE error nn occurred on END TRANSACTION
      • MKDE-94: An unexpected MKDE error nn occurred on ABORT TRANSACTION
      • MKDE-98: The log segment file SYS:SYSTEM/MKDE/LOG/0000XXX.LOG cannot be created. There was an error on the console or in zen.log
      • MKDE-103: System Error
      • MKDE-1001: The value specified for Cache Allocation is invalid
      • MKDE-1002: The value specified for Longest Compressed Record Size is invalid
      • MKDE-1003: The value specified for Extended Operation Buffer Size is invalid
      • MKDE-1004: The value specified for Open Files is invalid
      • MKDE-1005: The value specified for Operation Bundle Limit is invalid
      • MKDE-1007: The value specified for Number of Handles is invalid
      • MKDE-1008: The value specified for I/O Threads is invalid
      • MKDE-1009: The value specified for Maximum Sort Buffer is invalid
      • MKDE-1010: The path specified for Temporary Sorting Files is invalid
      • MKDE-1011: Info: The Number of Handles cannot be less than the Number of Open Files
      • MKDE-1015: The value specified for Maximum Record Size is invalid
      • MKDE-1017: The value specified for System Transaction Hold Limit is invalid
      • MKDE-1019: The value specified for Maximum Active Clients is invalid
      • MKDE-1020: The value specified for Worker Threads is invalid
      • MKDE-1021: The value specified for Thread Priority Delta is invalid
      • MKDE-1022: The value specified for Initiation Time Limit is invalid
      • MKDE-1023: The value specified for Disk I/O Wait Time is invalid
      • MKDE-1024: The value specified for Page Write Group Size is invalid
      • MKDE-1025: The value specified for Auto-Terminate Delay is invalid
      • MKDE-1026: The value specified for Number of Lines Allocated is invalid
      • MKDE-1027: The value specified for Message Log File Limit is invalid
      • MKDE-1028: The path specified for Home Directory is invalid
      • MKDE-1030: The value specified for the option_name option is invalid
      • MKDE-1032: The option specified is not a valid option
      • MKDE-1152: MKDE cannot get sufficient memory to complete the operation
      • MKDE-1156: The log file filename cannot be written. Check disk space
      • MKDE-1157: System Error: nn.nn.nn
      • MKDE-1161: The file filename is rolling back
      • MKDE-1164: Error creating/accessing semaphore
      • MKDE-1165: Error creating execution thread
      • MKDE-1166: Could not open Zen Event Log file. This file is created in the home directory. Verify that the directory is present and sufficient space is available.
      • MKDE-1167: Could not create IPC queue
      • MKDE-1168: Client(s) active - Shutdown anyway?
      • MKDE-1169: Could not open BTI.INI
      • MKDE-1171: The file BTI.INI is flagged as read only. The MKDE can temporarily override this attribute to save the current settings. Do you wish to continue?
      • MKDE-1172: Error writing to BTI.INI
      • MKDE-1175: I/O error - filename
      • MKDE-1176: Variable page error - filename
      • MKDE-1177: Help is not available
      • MKDE-1178: Resources allocated
      • MKDE-1179: Resources released
      • MKDE-1180: System Error: nn.nn.nn
      • MKDE-1183: Not enough available cache to complete an operation
      • MKDE-1184: Unable to set number of file handles to requested value. Maximum open files reduced to nn.
      • MKDE-1192: Settings read from NOVDB.INI - To change to BTI.INI, save current settings
      • MKDE-1193: The MKDE is using default settings
      • MKDE-1194: Additional worker thread spawned
      • MKDE-1207: The log file format is invalid
      • MKDE-1208: An Open operation failed on “xxxx” with MKDE error nn
      • MKDE-1209: An unexpected MKDE error nn occurred on INSERT to “xxxx”
      • MKDE-1210: An unexpected MKDE error nn occurred on UPDATE in “xxxx”
      • MKDE-1211: An unexpected MKDE error nn occurred on DELETE from “xxxx”
      • MKDE-1212: The system is out of memory
      • MKDE-1213: An internal error nn occurred
      • MKDE-1214: An unexpected MKDE error nn occurred on GET EQUAL in “xxxx”
      • MKDE-1215: The log file is corrupt
      • MKDE-1216: An error occurred while reading the log file
      • MKDE-1217: An unexpected MKDE error nn occurred on CREATE INDEX to filename
      • MKDE-1218: An unexpected MKDE error nn occurred on DROP INDEX to filename
      • MKDE-1219: An unexpected MKDE error nn occurred on BEGIN TRANSACTION to filename
      • MKDE-1220: An unexpected MKDE error nn occurred on END TRANSACTION to filename
      • MKDE-1221: An unexpected MKDE error nn occurred on ABORT TRANSACTION to filename
      • MKDE-1222: An unexpected MKDE error nn occurred on CLOSE to filename
      • MKDE-1223: An unexpected MKDE error nn occurred on GET POSITION to filename
      • MKDE-1224: An unexpected MKDE error nn occurred on BEGIN TRANSACTION
      • MKDE-1225: An unexpected MKDE error nn occurred on END TRANSACTION
      • MKDE-1226: An unexpected MKDE error nn occurred on ABORT TRANSACTION
      • MKDE-2001: The value specified for the Cache Allocation option is invalid
      • MKDE-2002: The value specified for the Largest Compressed Record Size option is invalid
      • MKDE-2004: The value specified for the Number of Open Files option is invalid
      • MKDE-2005: The value specified for the Operation Bundle Limit option is invalid
      • MKDE-2007: The value specified for the Number of Handles option is invalid
      • MKDE-2008: The value specified for the I/O Threads option is invalid
      • MKDE-2009: The value specified for the Active Clients option is invalid
      • MKDE-2010: The value specified for the Sort Buffer Size option is invalid
      • MKDE-2011: The path specified for the Temporary Directory option is invalid
      • MKDE-2012: The value specified for the option is invalid
      • MKDE-2013: The option specified is not a valid option
      • MKDE-2015: MKDE cannot get sufficient memory to complete the operation
      • MKDE-2019: The log file filename cannot be written. Check disk space
      • MKDE-2024: The file filename is rolling back
      • MKDE-2027: Error creating/accessing semaphore
      • MKDE-2028: Error creating execution thread
      • MKDE-2029: Could not open Event Log file.
      • MKDE-2039: System Error: nn.nn.nn
      • MKDE-2053: Additional worker thread spawned
      • MKDE-2055: Error creating named pipe
      • MKDE-2060: Error reading the registry. Error code: nn
      • MKDE-2061: Error writing the registry. Error code: nn
      • MKDE-2065: Error calling Service Control dispatcher
      • MKDE-2067: There is no suitable protocol available on this computer
      • MKDE-2068: The communications server is not available
      • MKDE-2075: The transaction log file LAST_SEG.LOG cannot be opened
      • MKDE-2076: An Open operation failed on “xxxx” with MKDE error nn
      • MKDE-2077: The log file format is invalid
      • MKDE-2078: An Open operation failed on “xxxx” with MKDE error nn
      • MKDE-2079: An unexpected MKDE error nn occurred on INSERT to “xxxx”
      • MKDE-2080: An unexpected MKDE error nn occurred on UPDATE in “xxxx”
      • MKDE-2081: An unexpected MKDE error nn occurred on DELETE from “xxxx”
      • MKDE-2082: The system is out of memory
      • MKDE-2083: An internal error nn occurred
      • MKDE-2084: An unexpected MKDE error nn occurred on GET EQUAL in “xxxx”
      • MKDE-2085: The log file is corrupt
      • MKDE-2086: An error occurred while reading the log file
      • MKDE-2087: An unexpected MKDE error nn occurred on CREATE INDEX to filename
      • MKDE-2088: An unexpected MKDE error nn occurred on DROP INDEX to filename
      • MKDE-2089: An unexpected MKDE error nn occurred on BEGIN TRANSACTION to filename
      • MKDE-2090: An unexpected MKDE error nn occurred on END TRANSACTION to filename
      • MKDE-2091: An unexpected MKDE error nn occurred on ABORT TRANSACTION to filename
      • MKDE-2092: An unexpected MKDE error nn occurred on CLOSE to filename
      • MKDE-2093: An unexpected MKDE error nn occurred on GET POSITION to filename
      • MKDE-2094: An unexpected MKDE error nn occurred on BEGIN TRANSACTION
      • MKDE-2095: An unexpected MKDE error nn occurred on END TRANSACTION
      • MKDE-2096: An unexpected MKDE error nn occurred on ABORT TRANSACTION
      • MKDE-2109: Page server detects cache engine IP address, not requesting invalid pages for n seconds
      • MKDE-2111: System Error: nn.nn.nn File: filename
      • MKDE-2130: JSON filter parse error at or around character nn
      • MKDE-2131: JSON filter query error: nn
      • MKDE-2140: Zen VSS Writer successfully started
      • MKDE-2141: Zen VSS Writer failed to start - problem with resource
      • MKDE-2142: Zen VSS Writer failed to start - error from Windows library: library
      • MKDE-2143: Zen VSS Writer - error from Windows library: library
      • MKDE-2144: Zen VSS Writer - invalid event sequence detected by state state
      • MKDE-2145: Zen VSS Writer received not-supported VSS request: request
      • MKDE-2146: Zen VSS Writer - exception in state state
      • MKDE-2147: Zen VSS Writer received an ABORT event during: state state
      • MKDE-2148: Zen VSS Writer state: state
      • MKDE-2149: Zen VSS Writer unable to freeze MicroKernel Database Engine
      • MKDE-2150: Zen VSS is not supported by Windows XP. Use Backup Agent instead.
      • MKDE-2151: Zen VSS Writer is not supported as a 32-bit WOW64 process. Use Backup Agent instead.
      • MKDE-2154: Zen VSS Writer watchdog detected that engine was frozen too long [nn secs].
      • MKDE-2160: Unable to set the process working set size to a minimum of nn% MB and a maximum of nn% MB.
      • MKDE-2161: Unable to get the process working set size.
      • MKDE-2162: Cache engine open of (normal|SQL Notify) NSL session by PID %d to server %s failed. Error code: %d
      • MKDE-2163: Cache engine close of (normal|SQL Notify) NSL session to server %s by PID %d failed. Error code: %d
      • MKDE-2164: Cache engine SQL listener for server %s failed. Error code: %d
      • MKDE-2165: Failed to start cache engine SQL listener for server %s.
      • MKDE-2166: Failed to stop cache engine SQL listener for server %s.
      • MKDE-2167: More than one cache engine SQL listener detected for server %s.
      • MKDE-2172: Defragmentation: filename encountered error nn.
  • REBUILD
    • Rebuild Utility Messages
      • REBUILD-2: The utility could not allocate memory
      • REBUILD-3: The utility could not rename file_name to file_name. The MicroKernel Database Engine status code was code_number.
      • REBUILD-4: The utility could not retrieve the MicroKernel Database Engine version information. The MicroKernel Database Engine status code was code_number.
      • REBUILD-5: The utility could not delete file_name
      • REBUILD-7: The utility could not open file_name. The MicroKernel Database Engine status code was code_number.
      • REBUILD-8: The utility could not open file_name in the Accelerated mode. The MicroKernel Database Engine status code was code_number.
      • REBUILD-9: The utility could not create the new file or files with the MicroKernel Database Engine 6.x advanced features
      • REBUILD-10: An invalid parameter or value was specified, or the command line was invalid
      • REBUILD-14: The utility did not rebuild file_name for the following reason:
      • REBUILD-15: MicroKernel Database Engine returned status code_number while operating on the following file: file_name
      • REBUILD-16: The file_name file is already in 6.x format
      • REBUILD-17: The file_name file is not a valid MicroKernel data file. The utility cannot rebuild the file.
      • REBUILD-18: The utility could not obtain the characteristics of file_name. The MicroKernel Database Engine status code was code_number.
      • REBUILD-19: The utility could not access the output directory specified. Directory_name might not exist or did not allow write access.
      • REBUILD-20: The utility is processing file_name
      • REBUILD-24: An error occurred accessing file_name. Make sure you specified a valid file name.
      • REBUILD-25: The utility is setting the owner name of an empty target file
      • REBUILD-26: The utility is dropping the indexes of an empty target file
      • REBUILD-27: The utility could not create the temporary file in the output directory during conversion
      • REBUILD-31: The utility could not create file_name. The MicroKernel Database Engine status code was code_number.
      • REBUILD-34: Key number code_number is invalid
      • REBUILD-35: Page size page_size is invalid. The page size will be changed to page_size. The rebuild process has ended.
      • REBUILD-38: The utility was terminated by the user
      • REBUILD-39: The utility may not be unloaded. Use Control-C to stop the utility.
      • REBUILD-44: The utility could not clone file_name. The MicroKernel Database Engine status code was code_number.
      • REBUILD-45: The command file file_name does not have an <end> or [end] delimiter.
      • REBUILD-48: The utility could not initialize the user interface library
      • REBUILD-63: The utility could not initialize the localized message table
      • REBUILD-65: The utility could not open file file_name for the following reason:
      • REBUILD-66: Operation(s) complete. See file_name for results.
      • REBUILD-67: Errors occurred. See file_name for results.
      • REBUILD-68: Status code code_number was returned while copying records from the following file: file_name.
      • REBUILD-69: Internal status internal_code was returned while copying records from the following file: file_name
      • REBUILD-71: The file file_name is already in a later format than the current MicroKernel Database Engine setting
      • REBUILD-72: The utility only converts files to file_format or later
      • REBUILD-73: The MicroKernel Database Engine is configured to create files in the same format as the source file. This is allowed only for file_format or later files.
      • REBUILD-74: The source file file_name does not contain system key. The utility could not rebuild the file as specified by user. The MicroKernel Database Engine returned status code_number.
      • REBUILD-75: File_format is not a valid file format value. Valid inputs for file format parameter are 6, 7, 8, 9, 95 and 13.
      • REBUILD-78: The logfile specified, file_name, is not valid. It is longer than maximum path length allowed.
      • REBUILD-79: Invalid database name specified. Database name cannot be longer than length bytes.
      • REBUILD-80: Password specified is longer than the maximum limit of length bytes
      • REBUILD-81: User ID specified is longer than the maximum limit of length bytes
      • REBUILD-82: Login to database failed. MicroKernel status code_number was returned.
      • REBUILD-85: The size of the output file exceeds the available disk space
      • REBUILD-86: Long owner name cannot be set on pre-9.5 file formats
      • REBUILD-90: Conversion not allowed due to long owner name. Clear the owner name before rebuilding.
      • REBUILD-91: Rebuild with System Data v2 not allowed on files older than v13. Specify file format 13 or newer.
  • VSS Writer
    • VSS Writer Messages

About This Document

Status Codes

Messages

General Reference > Status Codes and Messages > About This Document

General Reference > Status Codes and Messages > Status Codes

General Reference > Status Codes and Messages > Status Codes > 0

General Reference > Status Codes and Messages > Status Codes > 0 > Successful Interface Completion Status Code

General Reference > Status Codes and Messages > Status Codes > 0 > Successful Interface Completion Status Code > 0: The interface completed successfully

General Reference > Status Codes and Messages > Status Codes > 1 to 199

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 1: The operation parameter is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 2: The application encountered an I/O error

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 3: The file is not open

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 4: The application cannot find the key value

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 5: The record has a key field containing a duplicate key value

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 6: The key number parameter is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 7: The key number has changed

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 8: The current positioning is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 9: The operation encountered the end-of-file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 10: The key field is not modifiable

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 11: The specified file name is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 12: The MicroKernel cannot find the specified file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 13: The MicroKernel could not open the extension file for an extended file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 14: The MicroKernel cannot create or open the pre-image file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 15: The application encountered an I/O error during pre-imaging

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 16: The application encountered an expansion error

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 18: The disk is full

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 19: The application encountered an unrecoverable error

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 20: The MicroKernel or Btrieve Requester is inactive

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 21: The key buffer parameter is too short

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 22: The data buffer parameter is too short

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 23: The position block parameter is not 128 bytes long

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 24: The page size or data buffer size is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 25: The application cannot create the specified file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 26: The number of keys specified is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 26: The number of keys specified is invalid > Conditions For Which Status Code 26 Is Returned

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 26: The number of keys specified is invalid > Nullable Columns

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 27: The key position is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 28: The record length is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 29: The key length is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 30: The file specified is not a MicroKernel file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 31: The file is already extended

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 32: The file cannot be extended

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 33: The MicroKernel cannot unload

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 34: The specified extension name is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 35: The application encountered a directory error

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 37: Another transaction is active

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 38: The MicroKernel encountered a transaction control file I/O error

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 39: A Begin Transaction operation must precede an End/Abort Transaction operation

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 40: The file access request exceeds the maximum number of files allowed

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 41: The MicroKernel does not allow the attempted operation

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 42: A file previously opened in Accelerated mode was not closed

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 43: The specified record address is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 44: The specified key path is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 45: The specified key flags are invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 46: Access to the requested file is denied

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 47: The number of files opened exceeds the maximum allowed

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 48: The alternate collating sequence definition is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 49: The extended key type is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 50: The file owner is already set

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 51: The owner name is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 52: An error occurred while writing to the cache

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 53: The language interface version is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 54: The variable-length portion of the record is corrupt

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 55: The application specified an invalid attribute for an AUTOINCREMENT key

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 56: An index is incomplete

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 57: An expanded memory error occurred

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 58: The compression buffer length is too short

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 59: The specified file already exists

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 60: The specified reject count has been reached

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 61: The work space is too small

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 62: The descriptor is incorrect

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 63: The data buffer parameter specified on an Insert Extended operation is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 64: The filter limit has been reached

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 65: The field offset is incorrect

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 66: The maximum number of open databases has been exceeded

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 67: The MicroKernel cannot open the SQL data dictionary files

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 68: The MicroKernel cannot perform the RI Delete Cascade operation

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 69: The Delete operation specified a file that is damaged

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 71: There is a violation of the RI definitions

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 72: The MicroKernel cannot open the RI referenced file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 73: The RI definition is out of sync

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 75: The Btrieve operation has been canceled

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 76: There is a conflict on the referenced file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 77: The application encountered a wait error

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 78: The MicroKernel detected a deadlock condition

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 79: A programming error occurred

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 80: The MicroKernel encountered a record-level conflict

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 81: The MicroKernel encountered a lock error

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 82: The MicroKernel lost positioning

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 83: The MicroKernel attempted to update or delete a record that was read outside the transaction

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 84: The record or page is locked

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 85: The file is locked

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 86: The file table is full

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 87: The handle table is full

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 88: The application encountered an incompatible mode error

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 89: A name error occurred

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 90: The redirected device table is full

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 91: The application encountered a server error

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 92: The transaction table is full

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 93: The record lock types are incompatible

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 94: The application encountered a permission error

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 95: The session is no longer valid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 96: A communications environment error occurred

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 97: The data buffer is too small

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 100: No cache buffers are available

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 101: Insufficient operating system memory is available

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 102: Insufficient stack space is available

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 103: The chunk offset is too big

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 104: The MicroKernel does not recognize the locale

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 105: The file cannot be created with Variable-tail Allocation Tables (VATs)

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 106: The MicroKernel cannot perform a Get Next Chunk operation

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 107: The application attempted to perform a chunk operation on a pre-6.0 file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 109: An unknown error was encountered either creating or accessing a semaphore

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 110: The MicroKernel cannot access the archival logging configuration file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 111: The specified file name was not found in the archival logging configuration file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 112: The specified file is in use by another client

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 113: The MicroKernel is unable to open the archival log for the specified file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 114: The archival log for the specified file is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 115: The MicroKernel cannot access the archival logging dump file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 116: The file is owned by another MicroKernel engine acting as a Gateway

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 117: Invalid content detected in Continuous Operations delta file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 120: Maximum number of B-Tree index levels reached

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 121: Start of defragmentation blocked by conflicting activity

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 123: Defragmentation is not supported for certain types of files, such as key-only

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 124: Defragmentation stopped because request to lock file access timed out with no response

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 125: Defragmentation stopped because validation failed. No changes have been made to the file.

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 126: Start of defragmentation blocked by insufficient free storage space

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 127: Open file handles prevented completion of defragmentation.

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 130: The MicroKernel ran out of system locks

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 132: The file has reached its size limit

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 133: More than 5 concurrent users attempted to access the same data file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 134: The MicroKernel cannot read the International Sorting Rule

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 135: The specified ISR table is corrupt or otherwise invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 136: The MicroKernel cannot find the specified Alternate Collating Sequence in the file

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 137: The operation with this access method is incompatible

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 138: The NULL indicator position is invalid

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 139: The MicroKernel has detected an unacceptable value in the key number

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 143: The MicroKernel cannot allow unauthorized access to files in a secure MicroKernel database

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 146: Duplicate system key

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 147: The log segment is missing

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 148: A roll forward error occurred

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 149: SQL Trigger

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 151: Chunk Offset Too Small

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 160: Invalid parameters passed to MicroKernel

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 161: A key has reached a maximum limit for user count, session count, or data in use, or has changed state to expired or disabled

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 162: The client table is full

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 163: The NULL indicator cannot be the last segment

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 169: Protocol mismatch between client cache and remote engine

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 170: Database login required

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 171: Database login failed

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 172: Database name not found

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 173: Already logged in

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 174: Logout failed

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 175: Wrong database URI format

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 176: File or table not specified in URI

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 177: Table not in database

General Reference > Status Codes and Messages > Status Codes > 1 to 199 > MicroKernel Engine Status Codes > 178: Directory not in database

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1001: The lock parameter is out of range

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1002: A memory allocation error occurred

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1003: An invalid memory size parameter was specified

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1006: The pre-image buffer parameter is out of range

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1007: The files parameter is out of range

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1008: The initialization parameter is invalid

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1009: The transaction file name parameter is invalid

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1010: An error occurred during the access of the transaction control file

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1011: The compression buffer parameter is out of range

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1012: Invalid /n: option

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1013: The task list is full

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1015: One of the pointer parameters passed to the MicroKernel is invalid

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1016: The MicroKernel is already initialized

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1017: The Btrieve Requester is unable to find the resource file WBTRVRES.DLL

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1018: The application attempted to call the MicroKernel from a Btrieve callback function

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1019: The MicroKernel canceled the current Btrieve operation at the request of the application’s Btrieve callback function

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1020: Btrieve Requester Interface communications error

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1021: The MicroKernel failed to initialize

General Reference > Status Codes and Messages > Status Codes > 1000 to 1999 > MicroKernel Status Codes for Windows and DOS Workstations > 1022: The MicroKernel is shutting down

General Reference > Status Codes and Messages > Status Codes > 2000 to 2099

General Reference > Status Codes and Messages > Status Codes > 2000 to 2099 > Btrieve Requester Status Codes

General Reference > Status Codes and Messages > Status Codes > 2000 to 2099 > Btrieve Requester Status Codes > 2000: Internal error

General Reference > Status Codes and Messages > Status Codes > 2000 to 2099 > Btrieve Requester Status Codes > 2001: The memory allocation is insufficient

General Reference > Status Codes and Messages > Status Codes > 2000 to 2099 > Btrieve Requester Status Codes > 2002: Invalid option

General Reference > Status Codes and Messages > Status Codes > 2000 to 2099 > Btrieve Requester Status Codes > 2003: The Requester does not allow local access to the specified file

General Reference > Status Codes and Messages > Status Codes > 2000 to 2099 > Btrieve Requester Status Codes > 2007: A pointer parameter is invalid

General Reference > Status Codes and Messages > Status Codes > 2000 to 2099 > Btrieve Requester Status Codes > 2008: Router cannot find engine

General Reference > Status Codes and Messages > Status Codes > 2000 to 2099 > Btrieve Requester Status Codes > 2009: Cannot load MicroKernel Router component

General Reference > Status Codes and Messages > Status Codes > 2000 to 2099 > Btrieve Requester Status Codes > 2011: Btrieve requester resource DLL not loaded

General Reference > Status Codes and Messages > Status Codes > 2000 to 2099 > Btrieve Requester Status Codes > 2012: The Btrieve requester encountered an operating system error

General Reference > Status Codes and Messages > Status Codes > 2000 to 2099 > Btrieve Requester Status Codes > 2013: Filter request beyond the 128 limit

General Reference > Status Codes and Messages > Status Codes > 2200 to 2299

General Reference > Status Codes and Messages > Status Codes > 2200 to 2299 > XLT Status Codes

General Reference > Status Codes and Messages > Status Codes > 2200 to 2299 > XLT Status Codes > 2200: XLT Winsock Error

General Reference > Status Codes and Messages > Status Codes > 2200 to 2299 > XLT Status Codes > 2201: XLT RPC Error

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2300: No more database names are defined

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2301: The database name is invalid

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2302: Invalid buffer length

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2303: The database name must be unique; the specified database name already exists

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2304: The database type is invalid

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2305: The specified path for data dictionary or data file locations is invalid

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2306: DBNAMES.CFG could not be updated

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2307: Cannot open DBNAMES.CFG file

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2308: The specified RI flag is invalid

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2309: The database is in use

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2312: The bound database cannot share table data files

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2313: The bound database cannot share data dictionary files

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2314: Cannot create DBNAMES.CFG file

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2316: Cannot create DDF files for the bound database

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2324: Data dictionary files are not bound

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2325: Data dictionary files are already bound

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2326: Data dictionary files are bound, but do not need to be bound

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2329: Data file for a table is not bound

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2330: Data file for a table is bound, but does not need to be bound

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2331: Not allowed to change data dictionary location and change name at the same time

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2332: Not allowed to bind database and change name at the same time

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2333: Not allowed to unbind database and change name at the same time

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2334: Not allowed to create a data dictionary files and change name at the same time

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2335: Not allowed to change data locations and change name at the same time

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2336: Not allowed to change data dictionary location and bind database at the same time

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2337: Not allowed to change data dictionary location and unbind database at the same time

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2338: Not allowed to change the dictionary location and create dictionary files at the same time

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2339: Not allowed to create data dictionary files and bind database at the same time

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2340: Not allowed to create data dictionary and unbind database at the same time

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2341: Not allowed to bind database and change data locations at the same time

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2342: Not allowed to unbind database and change data locations at the same time

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2343: Named database general error

General Reference > Status Codes and Messages > Status Codes > 2300 to 2399 > Named Database Status Codes > 2351: Metadata version mismatch

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3000: The MicroKernel router encountered a memory allocation error

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3001: Local access is unavailable to the MicroKernel router

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3002: The MicroKernel router resource DLL is unavailable

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3003: The MicroKernel router detected an incompatible network component

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3004: The MicroKernel is not responding to the MicroKernel router

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3005: The MicroKernel router encountered an operating system error

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3006: The MicroKernel router detected an invalid session

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3008: Invalid configuration for MicroKernel router

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3009: NETinterface.DLL is not loaded

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3012: Local engine is not accessible to the MicroKernel router

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3013: The remote engine is inaccessible to the MicroKernel router because the networking component is not loaded

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3014: The MicroKernel router cannot find an engine

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3015: The MicroKernel router encountered an initialization error

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3016: The MicroKernel router encountered an internal error

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3017: Data buffer of the local engine is too small

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3018: The file is already closed

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3019: The MicroKernel router encountered a semaphore error

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3020: An error occurred while loading the MicroKernel

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3021: The MicroKernel router received a badly formatted data packet

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3022: The MicroKernel router could not send the request to the remote engine because the specified data buffer length resulted in a data packet object that is too large

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3030: Remote access not allowed

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3031: Linux requester cannot connect to this server

General Reference > Status Codes and Messages > Status Codes > 3000 to 3099 > MicroKernel Router Status Codes > 3032: Failed to initialize shared memory to local engine

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3103: Server name not found by Zen network services layer

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3104: The Zen network services layer encountered a permission error

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3105: No available transport protocol for the Zen network services layer

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3106: The Zen network services layer encountered a connection failure

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3107: The Zen network services layer is out of memory

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3108: The Zen network services layer detected an invalid session

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3110: The network layer is not connected

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3111: Failure during send to the target server

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3112: Failure during receive from the target server

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3114: The routing table of the Zen network services layer is full

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3115: Zen network services layer encountered a transport failure

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3116: Zen network services layer encountered a buffer mismatch

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3119: No authentication context is available

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3124: Zen network services layer task table is full

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3126: The Zen network services layer was unable to resolve the given file name into a valid path

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3131: Zen network services layer encountered an error while reconnecting

General Reference > Status Codes and Messages > Status Codes > 3100 to 3199 > Network Services Layer Status Codes > 3132: Unsupported Function

General Reference > Status Codes and Messages > Status Codes > 4000 to 4099

General Reference > Status Codes and Messages > Status Codes > 4000 to 4099 > Database Utilities Status Codes

General Reference > Status Codes and Messages > Status Codes > 4000 to 4099 > Database Utilities Status Codes > 4083: Component not loaded

General Reference > Status Codes and Messages > Status Codes > 4000 to 4099 > Database Utilities Status Codes > 4086: An internal error occurred. Utilities Requester receive size too small. Verify that the correct components are loaded

General Reference > Status Codes and Messages > Status Codes > 5000 to 5999

General Reference > Status Codes and Messages > Status Codes > 5000 to 5999 > Encryption Status Codes

General Reference > Status Codes and Messages > Status Codes > 5000 to 5999 > Encryption Status Codes > 5000: Client requires encryption

General Reference > Status Codes and Messages > Status Codes > 5000 to 5999 > Encryption Status Codes > 5001: Server requires encryption

General Reference > Status Codes and Messages > Status Codes > 6000 to 6050

General Reference > Status Codes and Messages > Status Codes > 6000 to 6050 > Data Dictionary Status Codes

General Reference > Status Codes and Messages > Status Codes > 6000 to 6050 > Data Dictionary Status Codes > 6002: Invalid Column

General Reference > Status Codes and Messages > Status Codes > 6000 to 6050 > Data Dictionary Status Codes > 6003: Foreign Key Not Found

General Reference > Status Codes and Messages > Status Codes > 6000 to 6050 > Data Dictionary Status Codes > 6005: Column Not Nullable

General Reference > Status Codes and Messages > Status Codes > 6000 to 6050 > Data Dictionary Status Codes > 6006: Invalid Data Type

General Reference > Status Codes and Messages > Status Codes > 6000 to 6050 > Data Dictionary Status Codes > 6007: Invalid Index Number

General Reference > Status Codes and Messages > Status Codes > 6000 to 6050 > Data Dictionary Status Codes > 6008: Too Many Segments

General Reference > Status Codes and Messages > Status Codes > 6000 to 6050 > Data Dictionary Status Codes > 6009: Index Name Duplicate

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7001: Invalid connection handle specified

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7002: NULL pointer specified

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7003: Buffer was too small

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7004: A general failure occurred

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7005: Invalid data type specified

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7006: Setting value is out of range

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7007: At least one selection item is invalid

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7008: Invalid sequence number

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7009: Data on open files is not available

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7010: Client ID is invalid

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7011: Insufficient access rights

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7012: Named database already exists

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7013: Named database does not exist

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7014: DTI not initialized

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7015: File not open

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7016: Dictionary files already exist

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7017: Dictionary path in use

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7018: Invalid DSN name

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7019: DSN already exists

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7020: Specified DSN does not exist

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7021: Invalid open mode for DSN

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7022: Component not loaded

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7023: The database files cannot be deleted because they are shared with another database

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7024: Invalid Btrieve Security Policy

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7025: Server name not found

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7026: Requester not loaded

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7027: Server table full

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7028: Client connections limit exceeded

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7029: Permissions Error

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7030: Out of memory

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7031: No transport is available

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7032: Connection failure

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7033: Connection was lost

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7034: Database name is too long

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7035: Insufficient number of data paths

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7036: File name already exists

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7037: Password is invalid

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7038: Destination data path is invalid

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7039: Dictionary path is invalid

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7040: Filter option is invalid

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7041: Cannot perform operation because database entries in FILE.DDF contain absolute paths

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7042: Bound database requires data dictionary files

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7043: Invalid character sent by client

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7044: Invalid character received by client

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7045: Internal buffer too small

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7046: Invalid encoding translation option

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7047: Invalid code page for database

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7048: Invalid operation

General Reference > Status Codes and Messages > Status Codes > 7000 to 7050 > Distributed Tuning Interface Status Codes > 7049: Cannot create DDFs due to metadata version mismatch with existing DDFs in the location provided

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7064: No license obtained for the product

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7065: A product has not been obtained

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7101: Invalid character in the license string

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7102: Illegal license type is defined

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7108: License key length is too long

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7109: No such license exists

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7110: Only temporary licenses are installed on the system and all of them have expired

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7111: Temporary licenses cannot be deauthorized. The license becomes invalid after its expiration date.

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7112: License is already installed

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7113: Invalid license key. Verify the provided key

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7113: Invalid license key. Verify the provided key > Special consideration for telephone authorization

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7115: Invalid product ID

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7116: Buffer overflow

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7117: License key is too long

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7118: The server is not running. Unable to show, authorize, or deauthorize a license. Verify that the server is running and that network communications are functioning.

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7119: The local server is not running. Unable to show, authorize, or deauthorize a license.

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7120: The license cannot be deauthorized

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7122: Your trial license has expired

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7124: An increase key for user count, session count, or data in use must have a vendor ID that matches the vendor ID of an authorized permanent key

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7125: An active permanent license already exists

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7126: Cannot increase the value beyond the maximum limit for user count, session count, or data in use

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7127: This key or a related key requires deauthorization. This version of the client cannot deauthorize a key.

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7130: The Zen product version for this key does not match the installed Zen engine

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7131: The OS platform for this key does not match the installed Zen engine

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7132: The Zen engine type for this key does not match the installed Zen engine

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7133: An associated UCI key is preventing the deauthorization of the permanent key. The UCI key may already be in the failed or disabled state, or it may be set to transition into the failed state the next time it is validated. Repair the UCI key and try again to deauthorize the permanent key.

General Reference > Status Codes and Messages > Status Codes > 7064 to 7140 > License Administrator Status Codes > 7140: The operation is not supported on this version of the engine.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7201: An error in one of the authorization libraries prevents further processing

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7212: Invalid product key for authorization

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7213: Product key does not pass checksum validation for authorization

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7215: Unable to determine machine ID. Verify you are logged on with administrator permissions and retry.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7218: Debug entry logged pertaining to acquiring the machine configuration

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7221: Authorizing or deauthorizing a key requires database engine to be running

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7222: DTI call could not be completed or there is a problem connecting to the engine

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7223: DTI returned invalid license string

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7224: User lacks the appropriate rights to authorize or deauthorize a key

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7226: Deauthorizing a key requires an authorized key

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7235: Product authorization is not supported on this version of Zen

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7239: Internet connection cannot access authorization server

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7241: Authorization service support files not found

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7252: Authorization key is invalid for the target machine

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7254: Key cannot be authorized because it contains invalid license data. Contact your product key vendor.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7260: The offline data does not pass validation

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7261: Error encountered while saving the offline authorization request data file

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7262: Error encountered while loading the offline authorization key data file

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7264: Product key is invalid

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7265: Authorization of the authorization key data must be on the same machine where the authorization request data was generated

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7267: This stage of the offline authorization is invalid or inconsistent with the requested offline operation

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7268: Offline authorization must be performed locally

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7269: An internal error occurred while trying to process the offline operation on the local machine

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7300: Local licensing component incompatible with remote licensing server

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7305: Product key not found in authorization database

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7306: Product key is not in a valid state

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7310: Product key has been disabled in the authorization database

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7311: Product Key is not a valid length

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7313: Product key is already used on a different machine

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7314: This key cannot be deauthorized because it was authorized on a machine with a different machine signature. Either it is being used on a different machine or, more likely, the hardware signature of the original machine has changed. If you are cloning or copying a key licensed for use on only one machine, please purchase another valid license key. Otherwise, repair the key, then try again to deauthorize it.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7315: Product key is already used on this machine

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7317: Deauthorizing a key requires an authorized key

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7334: Key has no machine signature associated with it

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7335: Operation is not allowed on a Multimachine Key

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7336: Authorization server prohibits authorization from within a Virtual Machine session

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7337: The number of cores in the system exceeds the maximum allowed by the product key.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7338: Authorization not allowed in debug mode

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7340: Product key cannot be authorized because the maximum usage count has been reached. Contact your product key vendor.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7341: Product key cannot be authorized because the maximum number of authorizations has been reached. Contact your product key vendor.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7342: Product key cannot be deauthorized because the maximum number of deauthorizations has been reached. Contact your product key vendor.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7343: Product key cannot be repaired because the maximum number of repairs has been reached. Contact your product key vendor.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7346: Product key has been authorized on the maximum number of machines allowed. Contact your product key vendor.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7347: Maximum number of offline authorizations has been reached. Contact your product key vendor.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7348: Temporary License key cannot be deauthorized

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7349: Temporary License key has already been authorized

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7365: Record changes were blocked due to multi-user access

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7366: Authorization server is busy

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7367: Multi-user access is preventing the operation from being completed

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7369: The server is currently unavailable. Please try again later.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7380: The Country or City is in the embargo list

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7422: Login failed. The user credentials are invalid.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7423: Permission for requested operation has been denied

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7424: User account is inactive

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7449: Key cannot be set to active because of a pending issue with the key vendor. Contact your product key vendor.

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7450: OEM ID does not exist

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7451: OEM account is inactive

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7452: OEM user is inactive

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7456: Invalid OEM user ID for the requested record

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7457: OEM product (Workgroup/Server) is not an authorized product

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7458: Maximum number of resets or repairs for the product key has been reached

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7471: Maximum number of seats for this OEM has been reached

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7472: Maximum number of licenses for this OEM has been reached

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7473: Maximum number of seats for this OEM account has been reached

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7474: Maximum number of licenses for this OEM account has been reached

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7475: Invalid value for user count, session count, or data in use

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7477: The OS Platform type is invalid for this account

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7478: Product type is invalid for this account

General Reference > Status Codes and Messages > Status Codes > 7200 to 7499 > Authorization Status Codes > 7479: Upgrade type is invalid for this account

General Reference > Status Codes and Messages > Status Codes > 8000 to 8499

General Reference > Status Codes and Messages > Status Codes > 8000 to 8499 > Component Management Status Codes

General Reference > Status Codes and Messages > Status Codes > 8000 to 8499 > Component Management Status Codes > 8005: Interface not initialized

General Reference > Status Codes and Messages > Status Codes > 8000 to 8499 > Component Management Status Codes > 8006: The specified component was not found

General Reference > Status Codes and Messages > Status Codes > 8000 to 8499 > Component Management Status Codes > 8020: Error loading component

General Reference > Status Codes and Messages > Status Codes > 8000 to 8499 > Component Management Status Codes > 8022: Component not initialized

General Reference > Status Codes and Messages > Status Codes > 8000 to 8499 > Component Management Status Codes > 8097: General security error

General Reference > Status Codes and Messages > Status Codes > 8000 to 8499 > Component Management Status Codes > 8099: Only one user may be connected when turning database security on or off

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8500: An error occurred during the components initialization

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8502: An error occurred when trying to locate W3UPIXYY.DLL

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8503: An invalid W3UPIXYY.DLL has been found

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8504: An error occurred when trying to create system semaphore

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8505: An initialization error occurred when trying to establish a session with the Zen engine

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8506: A fatal error occurred when loading the MicroKernel

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8507: No valid session was found

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8508: An error occurred when attempting to enable Btrieve access

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8509: A timeout occurred during the initialization of the MicroKernel

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8510: A fatal error occurred when loading the Scalable SQL engine

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8511: An error occurred when attempting to enable SQL access

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8512: A timeout occurred during the initialization of the Scalable SQL engine

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8513: An error occurred when disabling Btrieve access

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8514: An error occurred when unloading the MicroKernel

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8515: An error occurred when disabling SQL access

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8516: An error occurred when unloading the Scalable SQL engine

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8517: An error occurred when closing the session with the Zen engine

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8518: An error occurred when attempting to allocate system memory

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8519: A fatal error occurred when loading the SRDE

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8520: A timeout occurred during the initialization of the SRDE module

General Reference > Status Codes and Messages > Status Codes > 8500 to 8589 > ECAS Interface Status Codes > 8521: An error occurred when unloading the SRDE module

General Reference > Status Codes and Messages > Status Codes > 8590 to 8599

General Reference > Status Codes and Messages > Status Codes > 8590 to 8599 > Database Engine Service Status Codes

General Reference > Status Codes and Messages > Status Codes > 8590 to 8599 > Database Engine Service Status Codes > 8590: An error occurred in the database manager while initializing Components Manager

General Reference > Status Codes and Messages > Status Codes > 8590 to 8599 > Database Engine Service Status Codes > 8591: The database manager is already loaded

General Reference > Status Codes and Messages > Status Codes > 8590 to 8599 > Database Engine Service Status Codes > 8592: Insufficient memory to load the database manager

General Reference > Status Codes and Messages > Status Codes > 8590 to 8599 > Database Engine Service Status Codes > 8593: An error occurred while the database manager was creating a system thread

General Reference > Status Codes and Messages > Status Codes > 8590 to 8599 > Database Engine Service Status Codes > 8594: Engine cannot be restarted

General Reference > Status Codes and Messages > Status Codes > 10000 to 10100

General Reference > Status Codes and Messages > Status Codes > 10000 to 10100 > SQL Connection Manager Codes

General Reference > Status Codes and Messages > Status Codes > 10000 to 10100 > SQL Connection Manager Codes > 10000 through 10064: You have been unexpectedly disconnected from the server

General Reference > Status Codes and Messages > Status Codes > 10000 to 10100 > SQL Connection Manager Codes > 10065: Connection attempt timed out

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1003: Invalid API parameter

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1011: Out of memory

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1020: No more file handles

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1024: File share violation

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1026: Record size limit exceeded

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1032: File access denied

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1040: Too many columns defined

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1113: Too many active sessions

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1206: Non-db file or corrupted db

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1207: Database exclusively locked

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1250: Same column cannot be renamed and modified

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1251: Multiple columns may not be renamed to the same name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1252: Column may not be renamed multiple times

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1302: Table is exclusively locked

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1303: Table already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1304: Table is in use, cannot perform operation

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1305: No such table or object

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1309: No DDLs without exclusive lock

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1312: View already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1313: Trigger already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1314: No such table exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1315: No such view exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1316: No such trigger exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1317: No such index exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1403: Duplicate index exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1404: No such index

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1504: Null not valid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1507: No such column

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1508: Field is already defined

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1513: Index column type not supported

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1520: Key length is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1603: Currency not on a record

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1605: Illegal duplicate key

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1809: Permission denied

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1810: You are not authorized to perform this operation

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1902: Unable to log on. An invalid Username/Password may have been specified

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1903: Invalid account name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1905: Invalid password

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -1907: Access denied

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3001: User-defined functions with the same name already exist

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3002: The user-defined function name is invalid. User-defined function name can contain 1 to 30 characters

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3003: Cannot insert into a COBOL data file. Invalid operation

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3005: Cannot alter a COBOL fake table. Invalid operation

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3006: Cannot create triggers on COBOL tables. Invalid operation

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3007: Cannot create indexes on OCCURS/REDEFINES fields. Invalid operation

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3008: A dependent OCCURS table entry exists. Drop this OCCURS table to drop the main table

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3009: There is a dependent REDEFINES table. Drop this REDEFINES table to drop the main table

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3010: An OCCURS table with a mapping index to this index exists. Cannot drop index

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3011: A push-down filter has been defined on this column. This column cannot be updated

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3012: Only CREATE INDEX IN DICTIONARY operation is supported for COBOL fake main table and variant records

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3014: Trigger already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3015: Procedure already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3016: The fixed-portion size of a record exceeds 65535 bytes

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3017: Invalid path/file name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3018: Invalid data type conversion to an identity column

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3019: Cannot drop a system table

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3020: Invalid USING path/file name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3021: Invalid IN DICTIONARY

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3022: Invalid BLOB/CLOB data type in legacy table that contains NOTE/LVAR

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3023: Data type mismatch

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3024: String or binary data truncation error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3025: Arithmetic overflow error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3026: Invalid NULL conversion

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3027: Invalid foreign key constraint name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3028: Invalid password

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3029: Invalid group or user name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3030: Invalid procedure or trigger name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3031: MKC library cannot be loaded

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3032: Column in use by primary key

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3033: Column in use by foreign key

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3034: Type cannot be null

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3035: Length of the foreign key is incompatible

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3036: Scale of the foreign key is incompatible

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3037: Precision of the foreign key is incompatible

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3038: Data Type of the foreign key is incompatible

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3039: Trigger dependency

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3040: Group already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3041: User already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3043: Table referenced by foreign key

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3044: Too many levels of trigger recursion

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3045: Index in use by foreign key

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3046: Integrity Constraint Violation

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3047: RI no matching primary key

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3048: Invalid page size

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3049: Invalid free space threshold

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3050: Invalid page number

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3051: The dictionary is in use

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3052: Dictionary already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3053: RI table does not exist

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3054: Duplicate savepoint name error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3055: Only one Alternate Collating Sequence per index

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3056: Add Nullable column in legacy table

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3057: Conflicting collation

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3058: Drop last column

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3059: Database could not find dictionary files

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3060: Constraint already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3061: Invalid constraint name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3062: Database has no security

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3063: Database already secured

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3064: Alter legacy table

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3065: Invalid login

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3066: Group not found

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3067: Group not empty

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3068: Not allowed to define synonym for Public

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3069: Not allowed to drop Public

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3070: Not allowed to drop Administrator

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3071: Cannot revoke synonym privileges

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3072: Cannot grant synonym privileges

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3073: Privileges cannot be revoked from Administrator

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3075: Conversion rename error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3076: Conversion delete error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3077: Bad index name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3078: Bad column name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3079: Bad table name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3080: Data not bound

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3081: Wrong DDF bind information

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3082: DDF already bound

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3083: DDF not bound

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3084: Shared DDF

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3085: Shared data file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3086: Index in use by primary key

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3087: Primary key already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3088: Incompatible file version

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3089: Inconsistent multipath

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3090: Delete connected cycle

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3091: Self referencing delete not cascade

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3092: RI synchronization

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3093: Trigger RI conflict

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3094: Invalid delete rule

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3095: Invalid update rule

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3096: Object in use

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3097: Invalid collate

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3098: Number out of range

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3099: Foreign key invalid database name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3348: Cannot create DDFs due to metadata version mismatch with existing DDFs in the location provided

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3358: Not allowed to unbind database and change data locations at the same time

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3359: Not allowed to bind database and change data locations at the same time

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3360: Not allowed to create data dictionary and unbind database at the same time

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3362: Not allowed to change the dictionary location and create dictionary files at the same time

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3363: Not allowed to change data dictionary location and unbind database at the same time

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3364: Not allowed to change data dictionary location and bind database at the same time

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3365: Not allowed to change data locations and change name at the same time

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3366: Not allowed to create a data dictionary files and change name at the same time

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3367: Not allowed to unbind database and change name at the same time

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3368: Not allowed to bind database and change name at the same time

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3369: Not allowed to change data dictionary location and change name at the same time

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3370: Data file for a table is bound, but does not need to be bound

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3371: Data file for a table is not bound

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3374: Data dictionary files are bound, but do not need to be bound

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3375: Data dictionary files are already bound

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3376: Data dictionary files are not bound

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3383: Cannot create DDF files for the bound database

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3385: Cannot create DBNAMES.CFG file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3386: The bound database cannot share data dictionary files

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3387: The bound database cannot share table data files

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3390: The database is in use

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3391: The specified RI flag is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3392: Cannot open DBNAMES.CFG file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3393: DBNAMES.CFG could not be updated

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3394: The specified path for data dictionary or data file locations is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3395: The database type is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3396: The database name must be unique; the specified database name already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3397: Invalid buffer length

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3398: The database name is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3399: No more database names are defined

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3401: Invalid column-level GRANT statement

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3473: The Zen network services layer was unable to resolve the given file name into a valid path

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3475: Zen network services layer task table is full

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3480: No authentication context is available

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3484: Zen network services layer encountered a transport failure

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3485: The routing table of the Zen network services layer is full

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3487: Failure during receive from the target server

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3488: Failure during send to the target server

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3489: The network layer is not connected

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3491: The Zen network services layer detected an invalid session

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3492: The Zen network services layer is out of memory

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3493: The Zen network services layer encountered a connection failure

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3494: No available transport protocol for the Zen network services layer

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3495: The Zen network services layer encountered a permission error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3496: Server name not found by Zen network services layer

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3777: The MicroKernel router could not send the request to the remote engine because the specified data buffer length resulted in a data packet object that is too large

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3778: The MicroKernel router received a badly formatted data packet

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3779: An error occurred while loading the MicroKernel

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3780: The MicroKernel router encountered a semaphore error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3781: The file is already closed

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3782: Data buffer of the local engine is too small

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3783: The MicroKernel router encountered an internal error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3784: The MicroKernel router encountered an initialization error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3785: The MicroKernel router cannot find an engine

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3786: The remote engine is inaccessible to the MicroKernel router because the networking component is not loaded

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3787: Local engine is not accessible to the MicroKernel router

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3790: NETinterface.DLL is not loaded

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3791: Invalid configuration for MicroKernel router

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3793: The MicroKernel router detected an invalid session

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3794: The MicroKernel router encountered an operating system error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3795: The MicroKernel is not responding to the MicroKernel router

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3796: The MicroKernel router detected an incompatible network component

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3797: The MicroKernel router resource DLL is unavailable

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3798: Local access is unavailable to the MicroKernel router

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -3799: The MicroKernel router encountered a memory allocation error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4001: No relational operator found in the specified push-down filter

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4002: Specified push-down filter field not found in the table

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4003: The push-down filter specified contains invalid relational operator

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4837: The client table is full

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4838: A key has reached a maximum limit for user count, session count, or data in use, or has changed state to expired or disabled.

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4850: Problem Firing Trigger

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4851: A roll forward error occurred

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4852: The log segment is missing

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4853: Duplicate sys key

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4856: The MicroKernel cannot allow unauthorized access to files in a secure MicroKernel database

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4860: The MicroKernel has detected an unacceptable value in the key number

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4861: The NULL indicator position is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4863: The MicroKernel cannot find the specified Alternate Collating Sequence in the file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4864: The specified ISR table is corrupt or otherwise invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4865: The MicroKernel cannot read the International Sorting Rule

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4866: More than 5 concurrent users attempted to access the same data file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4867: The file has reached its size limit

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4869: The MicroKernel ran out of system locks

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4884: The file is owned by another MicroKernel engine acting as a Gateway

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4885: The MicroKernel cannot access the archival logging dump file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4886: The archival log for the specified file is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4887: The MicroKernel cannot find the archival log for the specified file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4888: The specified file is in use by another client

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4889: The specified file name was not found in the archival logging configuration file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4890: The MicroKernel cannot access the archival logging configuration file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4891: An unknown error was encountered either creating or accessing a semaphore

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4892: The application attempted to perform a chunk operation on a pre-6.0 file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4893: The MicroKernel cannot perform a Get Next Chunk operation

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4894: The file cannot be created with Variable-tail Allocation Tables (VATs)

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4895: The MicroKernel does not recognize the locale

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4896: The chunk offset is too big

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4897: Insufficient stack space is available

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4898: Insufficient operating system memory is available

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4899: No cache buffers are available

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4902: The data buffer is too small

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4903: A communications environment error occurred

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4904: The session is no longer valid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4905: The application encountered a permission error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4906: The record lock types are incompatible

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4907: The transaction table is full

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4908: The application encountered a server error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4909: The redirected device table is full

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4910: A name error occurred

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4911: The application encountered an incompatible mode error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4912: The handle table is full

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4913: The file table is full

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4914: File is locked

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4915: Record is locked

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4916: The MicroKernel attempted to update or delete a record that was read outside the transaction

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4917: The MicroKernel lost positioning

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4918: The MicroKernel encountered a lock error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4919: The MicroKernel encountered a record-level conflict

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4920: A programming error occurred

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4921: The MicroKernel detected a deadlock condition

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4922: The application encountered a wait error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4923: There is a conflict on the referenced file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4926: The RI definition is out of sync

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4927: The MicroKernel cannot open the RI referenced file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4928: There is a violation of the RI definitions

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4930: The Delete operation specified a file that is damaged

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4931 The MicroKernel cannot perform the RI Delete Cascade operation

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4932: The MicroKernel cannot open the SQL data dictionary files

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4933: The maximum number of open databases has been exceeded

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4934: The field offset is incorrect

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4935: The filter limit has been reached

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4936: The data buffer parameter specified on an Insert Extended operation is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4937: The descriptor is incorrect

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4938: The work space is too small

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4939: The specified reject count has been reached

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4940: The specified file already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4941: The compression buffer length is too short

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4942: An expanded memory error occurred

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4943: An index is incomplete

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4944: The application specified an invalid attribute for an AUTOINCREMENT key

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4945: The variable-length portion of the record is corrupt

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4946: The language interface version is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4947: An error occurred while writing to the cache

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4948: The owner name is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4949: The file owner is already set

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4950: The extended key type is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4951: The alternate collating sequence definition is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4952: The number of files opened exceeds the maximum allowed

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4953: Access to the requested file is denied

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4954: The specified key flags are invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4955: The specified key path is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4956: The specified record address is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4957: A file previously opened in Accelerated mode was not closed

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4958: The MicroKernel does not allow the attempted operation

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4959: The file access request exceeds the maximum number of files allowed

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4960: A Begin Transaction operation must precede an End/Abort Transaction operation

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4961: The MicroKernel encountered a transaction control file I/O error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4962: Another transaction is active

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4964: The application encountered a directory error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4965: The specified extension name is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4966: The MicroKernel cannot unload

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4967: The file cannot be extended

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4968: The file is already extended

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4969: The file specified is not a MicroKernel file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4970: The key length is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4971: The record length is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4972: The key position is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4973: The number of keys specified is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4974: The application cannot create the specified file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4975: The page size or data buffer size is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4976: The position block parameter is not 128 bytes long

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4977: The data buffer parameter is too short

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4978: The key buffer parameter is too short

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4979: The MicroKernel or Btrieve Requester is inactive

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4980: The application encountered an unrecoverable error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4981: The disk is full

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4983: The application encountered an expansion error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4984: The application encountered an I/O error during pre-imaging

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4985: The MicroKernel cannot create or open the pre-image file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4986: The MicroKernel could not open the extension file for an extended file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4987: The MicroKernel cannot find the specified file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4988: The specified file name is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4989: The key field is not modifiable

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4990: The operation encountered the end-of-file

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4991: The current positioning is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4992: The key number has changed

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4993: The key number parameter is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4994: The record has a key field containing a duplicate value

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4995: The application cannot find the key value

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4996: The file is not open

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4997: The application encountered an I/O error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -4998: The operation parameter is invalid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5022: Columns in the selection list and the returns clause do not match

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5025: Only IN parameter types allowed for user-defined functions

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5027: Invalid Syntax. The last statement included within a function must be a return statement

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5031: Default value cannot have the same UDF name as the UDF being created

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5032: RETURN statements in a UDF must have an argument

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5099: Error condition pertaining to a stored procedure

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5202: Record is locked

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5204: Table is not open

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5208: Invalid date

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5219: Translation failed

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5220: Invalid procedure name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5221: Invalid predicate name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5222: Invalid Code Page value

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5223: User-defined function name cannot be same as built-in function name

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5225: Cannot drop an in-built function or an aggregate function

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5226: Cannot invoke a user-defined function using CALL statement

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5229: Invalid user-defined or scalar function

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5230: No such stored procedure

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5231: Stored procedure already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5232: UDF already exists

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5233: Only database qualifier is allowed

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5235: Domain Authentication Failed

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5236: Bad Domain User Name or Password

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5237: No Zen Group Associated to Domain User

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5238: Multiple Zen Groups Associated to Domain User

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5239: Domain Authentication is a Windows Platform Security Option

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5240: The RPC Server is Unavailable

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5241: Session Credential Conflict Error

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5243: Specified column number is not valid

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5245: Procedure/view permissions not supported on this metadata version

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5247: This feature is not supported for the current metadata version

General Reference > Status Codes and Messages > Status Codes > -1000 to -5300 > Relational Engine Status Codes > -5248: Invalid partial column

General Reference > Status Codes and Messages > Status Codes > -100 to -199

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -101: The SET statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -102: The INSERT statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -103: The UPDATE statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -104: The DELETE statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -105: The CREATE statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -106: The ALTER TABLE statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -107: The DROP statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -108: The statement contains unresolved substitution variables and cannot be executed

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -109: The view contains no more records

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -110: The GRANT statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -111: The REVOKE statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -112: The START TRANSACTION statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -113: The COMMIT WORK statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -114: The ROLLBACK WORK statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -115: The MicroKernel successfully recalled the stored SQL statement

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -116: The MicroKernel successfully executed the stored SQL statement

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -118: The DECLARE statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -119: The SET assignment statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -120: The OPEN statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -121: The CLOSE statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -122: The FETCH statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -123: The positioned UPDATE statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -124: The positioned DELETE statement completed successfully

General Reference > Status Codes and Messages > Status Codes > -100 to -199 > Informative Status Codes > -125: The CALL stored procedure statement completed successfully

General Reference > Status Codes and Messages > Messages

General Reference > Status Codes and Messages > Messages > (No prefix)

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > Bfloat and Float Fields Must Be 4 or 8 Bytes

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > Column level permissions not allowed on views

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > First and Second Password Entries Do Not Match, Please Retype

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > Incorrect Parameter

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > Insufficient Memory

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > Invalid Load File Format. End of Record Marker Not Found

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > Local Engine Is Already Loaded

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > Must Have DOS 3.1 or Greater

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > Only Master user name can be specified in Execute As clause

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > Redirection List Not Large Enough

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > Specifying EXECUTE privilege for a Table is illegal

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > Specifying REFERENCES or EXECUTE privilege for a view is illegal

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > Specifying SELECT, INSERT, UPDATE, DELETE or REFERENCES privilege for a Procedure is illegal

General Reference > Status Codes and Messages > Messages > (No prefix) > Generic Messages > SQL Requester Is Already Loaded

General Reference > Status Codes and Messages > Messages > BREQUTIL

General Reference > Status Codes and Messages > Messages > BREQUTIL > Requester Utility Messages

General Reference > Status Codes and Messages > Messages > BREQUTIL > Requester Utility Messages > BREQUTIL-8: MicroKernel or MKDE Requester is not loaded

General Reference > Status Codes and Messages > Messages > BREQUTIL > Requester Utility Messages > BREQUTIL-9: MKDE operation nn was unsuccessful. The number of the applicable MKDE status code is nn

General Reference > Status Codes and Messages > Messages > BREQUTIL > Requester Utility Messages > BREQUTIL-16: MicroKernel or MKDE Requester cannot be removed from memory while the MKDE is loaded

General Reference > Status Codes and Messages > Messages > BUTIL

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-1: Message file initialization failed

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-2: Message file initialization failed. BUTIL was unable to access BTIUTILD.MSG

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-6: The BUTIL command is invalid

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-8: The command completed, but one or more errors occurred

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-9: The command did not complete due to an unrecoverable error

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-10: The command line contains a syntax error

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-11: The command line requires the index file

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-12: The command line requires the key number

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-13: The key size for key of type xxxx is invalid

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-14: The file that caused the error was <filename>

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-15: Error occurred on key segment descriptor xxx of description file

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-16: BUTIL could not open the description file

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-18: An error occurred during access of the sequential file

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-19: BUTIL could not open the alternate collating sequence file

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-20: An error occurred during access of the alternate collating sequence file

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-21: The file version is earlier than 6.0

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-23: The /D parameter specified to the Requester was too small for BUTIL to receive the entire record. BUTIL is writing only nn bytes

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-25: The /D parameter specified to BUTIL was too small for BUTIL to receive any part of the record

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-26: The data buffer is too small to hold any part of the record

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-27: An error occurred during the access of the variable page. BUTIL is writing the obtainable portion of the variable page.

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-30: The key position cannot exceed the record length

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-31: The key position plus key length cannot exceed the record length

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-32: The key length must be an even number for key type xxxx

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-36: The page size must be a multiple of 512, from 512 to 4,096

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-37: The record length cannot exceed the page size

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-38: The record length must be at least 4 and no greater than 4,096

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-41: The alternate collating sequence cannot be found

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-43: The file exists, but the Replace option was not specified

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-44: The file access error nn occurred for file filename

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-45: The number of duplicate keys must be between 1 and 119

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-47: BUTIL cannot open the command file

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-48: The command file is empty

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-49: The command file exceeds 1,000 bytes

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-50: An internal error caused BUTIL to terminate

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-52: MKDE cannot be stopped when SQL is loaded

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-53: MKDE error nn occurred for file or command xxxx

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-60: The end of the file occurred while BUTIL was expecting keyword xxxx on key segment descriptor nn

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-61: The end of the file occurred while BUTIL was expecting keyword xxxx

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-62: BUTIL was expecting keyword xxxx on key segment descriptor nn

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-63: BUTIL was expecting keyword xxxx

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-65: BUTIL has loaded no records

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-66: BUTIL has loaded nn records so far

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-70: The MKDE error nn occurred on closing a file

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-74: MKDE error nn was returned for the Stop Command

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-76: When BUTIL wrote the Page Allocation Table at page #nn, an error occurred

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-77: When BUTIL wrote a mirror copy of the Page Allocation Table at page #nn, an error occurred

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-82: Error occurred on file specification of the description file

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-84: BUTIL internal error

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-90: BUTIL could not allocate enough memory

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-91: BUTIL could not determine the size of the file

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-100: An internal status code nn

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-101: The list of files that were not processed is: list

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-102: A Roll Forward error occurred

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-103: Log segment number nn is missing

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-131: BUTIL was unable to create or open the sequential file

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-132: The disk volume is full

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-134: BUTIL was unable to create or open the new file

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-136: BUTIL was unable to write the new backup file

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-141: File xx has an invalid extension. This extension is reserved for extended unformatted files

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-142: File xx exists

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-143: File xx exists. This file is a potential extension of file yy. Remove this file and other potential extension files in this directory

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-144: File xx has reached the size limit. The utility created one or more extension files. The last extension file is yy

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-145: The utility found file xx. Remove this file before loading data from file yy

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-146: The source file and output file cannot be the same.

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-147: The utility cannot read record number xx due to MicroKernel error yy. The utility will attempt to read the remaining records from the opposite direction.

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-148: Program aborted by user

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-149: The utility cannot create a temporary file in the current directory to process the STAT command.

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-152: There was an error opening file filename

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-155: BUTIL cannot open the file filename

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-156: Failed to login to database. MicroKernel status xx is returned

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-157: Failed to logout from database. MicroKernel status xx is returned

General Reference > Status Codes and Messages > Messages > BUTIL > Maintenance Utility Messages > BUTIL-158: Invalid level value. Level must be 0, 1, 2, or 3.

General Reference > Status Codes and Messages > Messages > MKDE

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-12: The value specified for the –option is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-13: The option specified is not a valid option

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-16: There is insufficient memory to load the MicroKernel Engine

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-20: The log file filename cannot be written. Check disk space

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-25: The file filename is rolling back

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-51: Program initialization failed; the program was not loaded

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-57: The file filename cannot be created in the log segment directory xxxx

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-58: The file filename cannot be opened in the log segment directory xxxx

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-59: The log segment file filename cannot be created

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-75: The log file format is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-76: An Open operation failed on “xxxx” with MKDE error nn

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-77: An unexpected MKDE error nn occurred on INSERT to “xxxx”

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-78: An unexpected MKDE error nn occurred on UPDATE in “xxxx”

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-79: An unexpected MKDE error nn occurred on DELETE from “xxxx”

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-80: The system is out of memory

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-81: An internal error nn occurred

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-82: An unexpected MKDE error nn occurred on GET EQUAL in “xxxx”

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-83: The log file is corrupt

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-84: An error occurred while reading the log file

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-85: An unexpected MKDE error nn occurred on CREATE INDEX to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-86: An unexpected MKDE error nn occurred on DROP INDEX to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-87: An unexpected MKDE error nn occurred on BEGIN TRANSACTION to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-88: An unexpected MKDE error nn occurred on END TRANSACTION to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-89: An unexpected MKDE error nn occurred on ABORT TRANSACTION to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-90: An unexpected MKDE error nn occurred on CLOSE to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-91: An unexpected MKDE error nn occurred on GET POSITION to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-92: An unexpected MKDE error nn occurred on BEGIN TRANSACTION

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-93: An unexpected MKDE error nn occurred on END TRANSACTION

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-94: An unexpected MKDE error nn occurred on ABORT TRANSACTION

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-98: The log segment file SYS:SYSTEM/MKDE/LOG/0000XXX.LOG cannot be created. There was an error on the console or in zen.log

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-103: System Error

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1001: The value specified for Cache Allocation is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1002: The value specified for Longest Compressed Record Size is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1003: The value specified for Extended Operation Buffer Size is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1004: The value specified for Open Files is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1005: The value specified for Operation Bundle Limit is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1007: The value specified for Number of Handles is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1008: The value specified for I/O Threads is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1009: The value specified for Maximum Sort Buffer is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1010: The path specified for Temporary Sorting Files is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1011: Info: The Number of Handles cannot be less than the Number of Open Files

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1015: The value specified for Maximum Record Size is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1017: The value specified for System Transaction Hold Limit is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1019: The value specified for Maximum Active Clients is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1020: The value specified for Worker Threads is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1021: The value specified for Thread Priority Delta is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1022: The value specified for Initiation Time Limit is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1023: The value specified for Disk I/O Wait Time is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1024: The value specified for Page Write Group Size is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1025: The value specified for Auto-Terminate Delay is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1026: The value specified for Number of Lines Allocated is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1027: The value specified for Message Log File Limit is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1028: The path specified for Home Directory is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1030: The value specified for the option_name option is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1032: The option specified is not a valid option

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1152: MKDE cannot get sufficient memory to complete the operation

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1156: The log file filename cannot be written. Check disk space

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1157: System Error: nn.nn.nn

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1161: The file filename is rolling back

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1164: Error creating/accessing semaphore

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1165: Error creating execution thread

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1166: Could not open Zen Event Log file. This file is created in the home directory. Verify that the directory is present and sufficient space is available.

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1167: Could not create IPC queue

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1168: Client(s) active - Shutdown anyway?

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1169: Could not open BTI.INI

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1171: The file BTI.INI is flagged as read only. The MKDE can temporarily override this attribute to save the current settings. Do you wish to continue?

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1172: Error writing to BTI.INI

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1175: I/O error - filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1176: Variable page error - filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1177: Help is not available

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1178: Resources allocated

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1179: Resources released

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1180: System Error: nn.nn.nn

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1183: Not enough available cache to complete an operation

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1184: Unable to set number of file handles to requested value. Maximum open files reduced to nn.

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1192: Settings read from NOVDB.INI - To change to BTI.INI, save current settings

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1193: The MKDE is using default settings

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1194: Additional worker thread spawned

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1207: The log file format is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1208: An Open operation failed on “xxxx” with MKDE error nn

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1209: An unexpected MKDE error nn occurred on INSERT to “xxxx”

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1210: An unexpected MKDE error nn occurred on UPDATE in “xxxx”

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1211: An unexpected MKDE error nn occurred on DELETE from “xxxx”

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1212: The system is out of memory

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1213: An internal error nn occurred

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1214: An unexpected MKDE error nn occurred on GET EQUAL in “xxxx”

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1215: The log file is corrupt

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1216: An error occurred while reading the log file

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1217: An unexpected MKDE error nn occurred on CREATE INDEX to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1218: An unexpected MKDE error nn occurred on DROP INDEX to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1219: An unexpected MKDE error nn occurred on BEGIN TRANSACTION to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1220: An unexpected MKDE error nn occurred on END TRANSACTION to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1221: An unexpected MKDE error nn occurred on ABORT TRANSACTION to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1222: An unexpected MKDE error nn occurred on CLOSE to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1223: An unexpected MKDE error nn occurred on GET POSITION to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1224: An unexpected MKDE error nn occurred on BEGIN TRANSACTION

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1225: An unexpected MKDE error nn occurred on END TRANSACTION

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-1226: An unexpected MKDE error nn occurred on ABORT TRANSACTION

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2001: The value specified for the Cache Allocation option is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2002: The value specified for the Largest Compressed Record Size option is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2004: The value specified for the Number of Open Files option is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2005: The value specified for the Operation Bundle Limit option is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2007: The value specified for the Number of Handles option is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2008: The value specified for the I/O Threads option is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2009: The value specified for the Active Clients option is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2010: The value specified for the Sort Buffer Size option is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2011: The path specified for the Temporary Directory option is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2012: The value specified for the option is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2013: The option specified is not a valid option

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2015: MKDE cannot get sufficient memory to complete the operation

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2019: The log file filename cannot be written. Check disk space

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2024: The file filename is rolling back

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2027: Error creating/accessing semaphore

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2028: Error creating execution thread

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2029: Could not open Event Log file.

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2039: System Error: nn.nn.nn

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2053: Additional worker thread spawned

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2055: Error creating named pipe

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2060: Error reading the registry. Error code: nn

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2061: Error writing the registry. Error code: nn

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2065: Error calling Service Control dispatcher

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2067: There is no suitable protocol available on this computer

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2068: The communications server is not available

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2075: The transaction log file LAST_SEG.LOG cannot be opened

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2076: An Open operation failed on “xxxx” with MKDE error nn

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2077: The log file format is invalid

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2078: An Open operation failed on “xxxx” with MKDE error nn

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2079: An unexpected MKDE error nn occurred on INSERT to “xxxx”

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2080: An unexpected MKDE error nn occurred on UPDATE in “xxxx”

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2081: An unexpected MKDE error nn occurred on DELETE from “xxxx”

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2082: The system is out of memory

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2083: An internal error nn occurred

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2084: An unexpected MKDE error nn occurred on GET EQUAL in “xxxx”

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2085: The log file is corrupt

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2086: An error occurred while reading the log file

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2087: An unexpected MKDE error nn occurred on CREATE INDEX to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2088: An unexpected MKDE error nn occurred on DROP INDEX to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2089: An unexpected MKDE error nn occurred on BEGIN TRANSACTION to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2090: An unexpected MKDE error nn occurred on END TRANSACTION to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2091: An unexpected MKDE error nn occurred on ABORT TRANSACTION to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2092: An unexpected MKDE error nn occurred on CLOSE to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2093: An unexpected MKDE error nn occurred on GET POSITION to filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2094: An unexpected MKDE error nn occurred on BEGIN TRANSACTION

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2095: An unexpected MKDE error nn occurred on END TRANSACTION

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2096: An unexpected MKDE error nn occurred on ABORT TRANSACTION

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2109: Page server detects cache engine IP address, not requesting invalid pages for n seconds

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2111: System Error: nn.nn.nn File: filename

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2130: JSON filter parse error at or around character nn

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2131: JSON filter query error: nn

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2140: Zen VSS Writer successfully started

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2141: Zen VSS Writer failed to start - problem with resource

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2142: Zen VSS Writer failed to start - error from Windows library: library

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2143: Zen VSS Writer - error from Windows library: library

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2144: Zen VSS Writer - invalid event sequence detected by state state

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2145: Zen VSS Writer received not-supported VSS request: request

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2146: Zen VSS Writer - exception in state state

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2147: Zen VSS Writer received an ABORT event during: state state

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2148: Zen VSS Writer state: state

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2149: Zen VSS Writer unable to freeze MicroKernel Database Engine

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2150: Zen VSS is not supported by Windows XP. Use Backup Agent instead.

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2151: Zen VSS Writer is not supported as a 32-bit WOW64 process. Use Backup Agent instead.

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2154: Zen VSS Writer watchdog detected that engine was frozen too long [nn secs].

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2160: Unable to set the process working set size to a minimum of nn% MB and a maximum of nn% MB.

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2161: Unable to get the process working set size.

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2162: Cache engine open of (normal|SQL Notify) NSL session by PID %d to server %s failed. Error code: %d

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2163: Cache engine close of (normal|SQL Notify) NSL session to server %s by PID %d failed. Error code: %d

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2164: Cache engine SQL listener for server %s failed. Error code: %d

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2165: Failed to start cache engine SQL listener for server %s.

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2166: Failed to stop cache engine SQL listener for server %s.

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2167: More than one cache engine SQL listener detected for server %s.

General Reference > Status Codes and Messages > Messages > MKDE > MicroKernel Engine Messages > MKDE-2172: Defragmentation: filename encountered error nn.

General Reference > Status Codes and Messages > Messages > REBUILD

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-2: The utility could not allocate memory

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-3: The utility could not rename file_name to file_name. The MicroKernel Database Engine status code was code_number.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-4: The utility could not retrieve the MicroKernel Database Engine version information. The MicroKernel Database Engine status code was code_number.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-5: The utility could not delete file_name

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-7: The utility could not open file_name. The MicroKernel Database Engine status code was code_number.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-8: The utility could not open file_name in the Accelerated mode. The MicroKernel Database Engine status code was code_number.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-9: The utility could not create the new file or files with the MicroKernel Database Engine 6.x advanced features

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-10: An invalid parameter or value was specified, or the command line was invalid

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-14: The utility did not rebuild file_name for the following reason:

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-15: MicroKernel Database Engine returned status code_number while operating on the following file: file_name

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-16: The file_name file is already in 6.x format

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-17: The file_name file is not a valid MicroKernel data file. The utility cannot rebuild the file.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-18: The utility could not obtain the characteristics of file_name. The MicroKernel Database Engine status code was code_number.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-19: The utility could not access the output directory specified. Directory_name might not exist or did not allow write access.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-20: The utility is processing file_name

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-24: An error occurred accessing file_name. Make sure you specified a valid file name.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-25: The utility is setting the owner name of an empty target file

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-26: The utility is dropping the indexes of an empty target file

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-27: The utility could not create the temporary file in the output directory during conversion

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-31: The utility could not create file_name. The MicroKernel Database Engine status code was code_number.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-34: Key number code_number is invalid

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-35: Page size page_size is invalid. The page size will be changed to page_size. The rebuild process has ended.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-38: The utility was terminated by the user

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-39: The utility may not be unloaded. Use Control-C to stop the utility.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-44: The utility could not clone file_name. The MicroKernel Database Engine status code was code_number.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-45: The command file file_name does not have an <end> or [end] delimiter.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-48: The utility could not initialize the user interface library

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-63: The utility could not initialize the localized message table

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-65: The utility could not open file file_name for the following reason:

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-66: Operation(s) complete. See file_name for results.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-67: Errors occurred. See file_name for results.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-68: Status code code_number was returned while copying records from the following file: file_name.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-69: Internal status internal_code was returned while copying records from the following file: file_name

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-71: The file file_name is already in a later format than the current MicroKernel Database Engine setting

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-72: The utility only converts files to file_format or later

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-73: The MicroKernel Database Engine is configured to create files in the same format as the source file. This is allowed only for file_format or later files.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-74: The source file file_name does not contain system key. The utility could not rebuild the file as specified by user. The MicroKernel Database Engine returned status code_number.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-75: File_format is not a valid file format value. Valid inputs for file format parameter are 6, 7, 8, 9, 95 and 13.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-78: The logfile specified, file_name, is not valid. It is longer than maximum path length allowed.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-79: Invalid database name specified. Database name cannot be longer than length bytes.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-80: Password specified is longer than the maximum limit of length bytes

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-81: User ID specified is longer than the maximum limit of length bytes

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-82: Login to database failed. MicroKernel status code_number was returned.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-85: The size of the output file exceeds the available disk space

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-86: Long owner name cannot be set on pre-9.5 file formats

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-90: Conversion not allowed due to long owner name. Clear the owner name before rebuilding.

General Reference > Status Codes and Messages > Messages > REBUILD > Rebuild Utility Messages > REBUILD-91: Rebuild with System Data v2 not allowed on files older than v13. Specify file format 13 or newer.

General Reference > Status Codes and Messages > Messages > VSS Writer

General Reference > Status Codes and Messages > Messages > VSS Writer > VSS Writer Messages