Installation and Configuration Guide : 3. Installing and Configuring OpenROAD on UNIX or Linux : Start or Stop the OpenROAD Server
 
Share this page                  
Start or Stop the OpenROAD Server
You start the OpenROAD Server using the orspostart command. You shut down the OpenROAD Server using the orspostop command.
Note:  You must execute the commands as the user under which OpenROAD was installed (usually "ingres").
To start the OpenROAD Server
At the command line, enter the following command:
orspostart &
To shut down the OpenROAD Server
At the command line, enter the following command:
orspostop